Toymods Car Club Inc: Tech & Conversions => N/A exhaust diameter and decreasing diameters vs flow.

Toymods Car Club
www.toymods.org.au

F.A.Q.

Toymods » Tech & Conversions » N/A exhaust diameter and decreasing diameters vs flow. Show: Today's Posts :: Show Polls Email to friend

Author

Topic

BlackSupra
Forums Junkie

Registered:
August 2002

Re: N/A exhaust diameter and decreasing diameters vs flow.	Thu, 14 August 2003 10:22

But the final exit pipe diameter is 2.5inch which is no bigger than the whole system would be if it was made one size. Just thinking that freeing the flow at the top of the pipe, whilst trying to maintain 'some' backpressure may be beneficial to both power and torque. [Updated on: Thu, 14 August 2003 10:23] [Report message to a moderator]

Send a private message to this user

[Message index]

Subject Poster Date

Read Message N/A exhaust diameter and decreasing diameters vs flow. BlackSupra Thu, 14 August 2003 08:30
Re: N/A exhaust diameter and decreasing diameters vs flow. boudan Thu, 14 August 2003 09:43
Re: N/A exhaust diameter and decreasing diameters vs flow. BlackSupra Thu, 14 August 2003 10:03
Read Message Re: N/A exhaust diameter and decreasing diameters vs flow. oldcorollas Thu, 14 August 2003 10:18
Re: N/A exhaust diameter and decreasing diameters vs flow. BlackSupra Thu, 14 August 2003 10:22
Re: N/A exhaust diameter and decreasing diameters vs flow. oldcorollas Thu, 14 August 2003 10:35
Read Message Re: N/A exhaust diameter and decreasing diameters vs flow. BlackSupra Thu, 14 August 2003 11:09
Re: N/A exhaust diameter and decreasing diameters vs flow. oldcorollas Thu, 14 August 2003 14:21
Re: N/A exhaust diameter and decreasing diameters vs flow. oldcorollas Thu, 14 August 2003 14:22
Read Message Re: N/A exhaust diameter and decreasing diameters vs flow. BlackSupra Fri, 15 August 2003 01:51
Re: N/A exhaust diameter and decreasing diameters vs flow. oldcorollas Sun, 17 August 2003 14:21
Re: N/A exhaust diameter and decreasing diameters vs flow. BlackSupra Mon, 18 August 2003 02:47
Read Message Re: N/A exhaust diameter and decreasing diameters vs flow. oldcorollas Mon, 18 August 2003 03:38
Re: N/A exhaust diameter and decreasing diameters vs flow. boudan Thu, 14 August 2003 10:06
Re: N/A exhaust diameter and decreasing diameters vs flow. draven Thu, 14 August 2003 10:08
Read Message Re: N/A exhaust diameter and decreasing diameters vs flow. BlackSupra Thu, 14 August 2003 10:14
Re: N/A exhaust diameter and decreasing diameters vs flow. draven Thu, 14 August 2003 11:39
Re: N/A exhaust diameter and decreasing diameters vs flow. BlackSupra Thu, 14 August 2003 11:50
Read Message Re: N/A exhaust diameter and decreasing diameters vs flow. draven Thu, 14 August 2003 12:28
Re: N/A exhaust diameter and decreasing diameters vs flow. BlackSupra Thu, 14 August 2003 12:30
Re: N/A exhaust diameter and decreasing diameters vs flow. 7M-Brisbane Fri, 15 August 2003 13:21
Read Message Re: N/A exhaust diameter and decreasing diameters vs flow. ed_ma61 Mon, 18 August 2003 14:22
Re: N/A exhaust diameter and decreasing diameters vs flow. gmsta27 Mon, 18 August 2003 18:27
Re: N/A exhaust diameter and decreasing diameters vs flow. oldcorollas Tue, 19 August 2003 02:06
Read Message Re: N/A exhaust diameter and decreasing diameters vs flow. BlackSupra Tue, 19 August 2003 08:34
Re: N/A exhaust diameter and decreasing diameters vs flow. ed_ma61 Tue, 19 August 2003 11:13

Previous Topic: 7MGE bore spacing and overbore limit
Next Topic: TA22 Indicators and 2TG Tensioner

-=] Back to Top [=-

Current Time: Mon Jul 28 16:56:01 UTC 2025

Total time taken to generate the page: 0.0048849582672119 seconds

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.