| Author | Topic |
|---|
I supported Toymods
Location:
Epping, Sydney
Registered:
May 2002
|
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
Thu, 14 August 2003 11:39
 
|
 |
I'd probably go
good extractors -> 3" -> high flow cat -> 3"-2.5" -> 2.5" -> muffler
extractors are probably the most important. and 3" might be overkill, I dont really know much about n/a exhausts
if that's too noisey, you can add another muffler (not a resonator), which makes it a 3 stage system.
expensive, but good
|
|
|
| | Subject | Poster | Date |
|---|
 |
N/A exhaust diameter and decreasing diameters vs flow.
|
BlackSupra | Thu, 14 August 2003 08:30 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
boudan | Thu, 14 August 2003 09:43 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
BlackSupra | Thu, 14 August 2003 10:03 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
oldcorollas | Thu, 14 August 2003 10:18 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
BlackSupra | Thu, 14 August 2003 10:22 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
oldcorollas | Thu, 14 August 2003 10:35 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
BlackSupra | Thu, 14 August 2003 11:09 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
oldcorollas | Thu, 14 August 2003 14:21 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
oldcorollas | Thu, 14 August 2003 14:22 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
BlackSupra | Fri, 15 August 2003 01:51 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
oldcorollas | Sun, 17 August 2003 14:21 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
BlackSupra | Mon, 18 August 2003 02:47 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
oldcorollas | Mon, 18 August 2003 03:38 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
boudan | Thu, 14 August 2003 10:06 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
draven | Thu, 14 August 2003 10:08 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
BlackSupra | Thu, 14 August 2003 10:14 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
draven | Thu, 14 August 2003 11:39 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
BlackSupra | Thu, 14 August 2003 11:50 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
draven | Thu, 14 August 2003 12:28 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
BlackSupra | Thu, 14 August 2003 12:30 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
7M-Brisbane | Fri, 15 August 2003 13:21 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
ed_ma61 | Mon, 18 August 2003 14:22 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
gmsta27 | Mon, 18 August 2003 18:27 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
oldcorollas | Tue, 19 August 2003 02:06 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
BlackSupra | Tue, 19 August 2003 08:34 |
|
Re: N/A exhaust diameter and decreasing diameters vs flow.
|
ed_ma61 | Tue, 19 August 2003 11:13 |
