F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 2TGEU lack of reviness Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
thetoyman75 Forums Junkie Club President I supported Toymods Location: Sydney Registered: May 2002	Re: 2TGEU lack of reviness Wed, 10 July 2002 09:09 Ignition Dwell can have a HUGE impact on the Reviness of a 2TGEU. If you have the electronic Ignition what ignitor are you using ? Different Ignitors have different Dwell settings. The Ignitor from a 22RE appears to run them quite well. You should easily be able to rev it past 6000 rpm it is running correctly. ! If that checks out I would be having a good look at the advance on your Dizzy. check the vacuum advance is still working and if possible get the internal weights looked at the also make a HUGE difference. [Report message to a moderator]

	Subject	Poster	Date
	2TGEU lack of reviness	Karl_skewes	Tue, 09 July 2002 11:40
	Re: 2TGEU lack of reviness	Jonny2TG	Tue, 09 July 2002 12:35
	Re: 2TGEU lack of reviness	Karl_skewes	Tue, 09 July 2002 22:13
	Re: 2TGEU lack of reviness	thetoyman75	Wed, 10 July 2002 09:09
	Re: 2TGEU lack of reviness	Karl_skewes	Wed, 10 July 2002 10:04
	Re: 2TGEU lack of reviness	thetoyman75	Thu, 11 July 2002 00:00
	Re: 2TGEU lack of reviness	Karl_skewes	Thu, 11 July 2002 06:33

Previous Topic:	Getting fuel and spark at points but motor wont start?
Next Topic:	Cresidda Wheel Offsets Vs ST162 Offsets

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.