| Author | Topic |
|---|
Location:
Brisbane
Registered:
May 2002
|
|
Re: RA60 Metal Kings part number?
|
Fri, 15 August 2003 02:33
 
|
 |
DB265 are the correct size for an MA61, so I'm guessing that's not right for an RA60 (from memory they have smaller pads).
I got burned by that web site a while ago; I got the pads listed under MA61 (DB281) and they were way too small! Maybe these are the RA60 pads? In any case, your best bet is to look at the diagram of each pad and compare them to what you have; when I did this is was pretty obvious which one I needed, because the DB281 is way different to the DB265.
|
|
|
| | Subject | Poster | Date |
|---|
 |
RA60 Metal Kings part number?
|
Nark | Fri, 15 August 2003 00:53 |
|
Re: RA60 Metal Kings part number?
|
mr_mcfarlane | Fri, 15 August 2003 01:14 |
|
Re: RA60 Metal Kings part number?
|
Nark | Fri, 15 August 2003 01:42 |
|
Re: RA60 Metal Kings part number?
|
mr_mcfarlane | Fri, 15 August 2003 01:46 |
|
Re: RA60 Metal Kings part number?
|
Norbie | Fri, 15 August 2003 02:33 |
|
Re: RA60 Metal Kings part number?
|
Nark | Fri, 15 August 2003 03:46 |
|
Re: RA60 Metal Kings part number?
|
Norbie | Fri, 15 August 2003 04:54 |
|
Re: RA60 Metal Kings part number?
|
Nark | Fri, 15 August 2003 05:00 |
|
Re: RA60 Metal Kings part number?
|
c2888 | Fri, 15 August 2003 06:53 |
|
Re: RA60 Metal Kings part number?
|
Stefan | Fri, 15 August 2003 10:56 |
|
Re: RA60 Metal Kings part number?
|
justcallmefrank | Fri, 15 August 2003 11:13 |
