F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 7MGE bore spacing and overbore limit Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
stevevp Regular Location: Brisbane Qld Registered: May 2002	Re: 7MGE bore spacing and overbore limit Fri, 15 August 2003 06:50 The original Australian press kit for the MA70 and MX83 has a wealth of information From the text: Quote: With the re-examination of the valve timing, the crankshaft has been modified to improve the torque at the low speed range so I assume they mean the later and heavier crank complements the new shorter duration cams (and it appears to be direct JapLish too) Did you know the Cressida's body is mostly galvanised and the exterior panels are a non corrosive steel alloy called Excelite? [Report message to a moderator]

	Subject	Poster	Date
	7MGE bore spacing and overbore limit	stevevp	Wed, 13 August 2003 13:18
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Wed, 13 August 2003 13:56
	Re: 7MGE bore spacing and overbore limit	gianttomato	Wed, 13 August 2003 14:14
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Wed, 13 August 2003 14:46
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Wed, 13 August 2003 14:31
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Wed, 13 August 2003 15:35
	Re: 7MGE bore spacing and overbore limit	stevevp	Wed, 13 August 2003 22:45
	Re: 7MGE bore spacing and overbore limit	gianttomato	Thu, 14 August 2003 00:18
	Re: 7MGE bore spacing and overbore limit	BlackSupra	Thu, 14 August 2003 01:30
	Re: 7MGE bore spacing and overbore limit	gianttomato	Thu, 14 August 2003 01:47
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Thu, 14 August 2003 02:50
	Re: 7MGE bore spacing and overbore limit	stevevp	Thu, 14 August 2003 08:58
	Re: 7MGE bore spacing and overbore limit	stevevp	Thu, 14 August 2003 09:02
	Re: 7MGE bore spacing and overbore limit	BlackSupra	Thu, 14 August 2003 09:32
	Re: 7MGE bore spacing and overbore limit	stevevp	Thu, 14 August 2003 09:57
	Re: 7MGE bore spacing and overbore limit	oldcorollas	Thu, 14 August 2003 10:11
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Thu, 14 August 2003 11:48
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Thu, 14 August 2003 13:09
	Re: 7MGE bore spacing and overbore limit	stevevp	Thu, 14 August 2003 13:47
	Re: 7MGE bore spacing and overbore limit	Stenno	Mon, 18 August 2003 01:55
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Mon, 18 August 2003 14:17
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Thu, 14 August 2003 11:13
	Re: 7MGE bore spacing and overbore limit	stevevp	Thu, 14 August 2003 11:17
	Re: 7MGE bore spacing and overbore limit	stevevp	Thu, 14 August 2003 22:32
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Fri, 15 August 2003 02:57
	Re: 7MGE bore spacing and overbore limit	stevevp	Fri, 15 August 2003 06:50
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Fri, 15 August 2003 08:07
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Mon, 18 August 2003 14:37
	Re: 7MGE bore spacing and overbore limit	Stenno	Tue, 19 August 2003 05:18
	Re: 7MGE bore spacing and overbore limit	ed_ma61	Tue, 19 August 2003 11:16

Previous Topic:	NOS System difference ??
Next Topic:	N/A exhaust diameter and decreasing diameters vs flow.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.