F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » to bore or not to bore.....how to tell?? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
ed_ma61 Forums Junkie Location: Lost in the K hole Registered: May 2002	Re: to bore or not to bore.....how to tell?? Thu, 11 July 2002 03:13 i remember the 85mm bore limit, but looking at the block, 85mm doesnt leave a whole lot of love between cyls! i think 84mm would be safer if the bore is good. and what you want those pistons for!?? nice use of smilies by the way! ill get an internal micrometer and have a look. not sure the manual states the limits of wear in these dimensions tho. bore seems very smooth with not feelable ridge at the bore lip. but ill measure anyway. figuring out the pistons is going to be a little dicey without that M crank. even if the 5M/M blocks both have the same 230mm deck height, im going to need a very different 84mm piston (compared to stock 5M) to make up the 5mm less stroke when the M crank meets the 5M block. well, perhaps not 'that' different, you'd figure you'd need just 5mm taller, but thats assuming the conrods are the same. BLAGH! need to get that M crank/rods off you i think!!! bugger.... cheers ed [Report message to a moderator]

	Subject	Poster	Date
	to bore or not to bore.....how to tell??	ed_ma61	Wed, 10 July 2002 12:01
	Re: to bore or not to bore.....how to tell??	gianttomato	Thu, 11 July 2002 01:24
	Re: to bore or not to bore.....how to tell??	ed_ma61	Thu, 11 July 2002 03:13
	Re: to bore or not to bore.....how to tell??	gianttomato	Thu, 11 July 2002 03:48
	Re: to bore or not to bore.....how to tell??	Corvid	Thu, 11 July 2002 04:28
	Re: to bore or not to bore.....how to tell??	ed_ma61	Thu, 11 July 2002 04:38
	Re: to bore or not to bore.....how to tell??	ed_ma61	Thu, 11 July 2002 04:45
	Re: to bore or not to bore.....how to tell??	gianttomato	Thu, 11 July 2002 05:16
	Re: to bore or not to bore.....how to tell??	ed_ma61	Thu, 11 July 2002 05:33
	Re: to bore or not to bore.....how to tell??	purpleminiep	Thu, 11 July 2002 06:10
	Re: to bore or not to bore.....how to tell??	humble	Thu, 11 July 2002 07:08
	Re: to bore or not to bore.....how to tell??	ed_ma61	Thu, 11 July 2002 07:37
	Re: to bore or not to bore.....how to tell??	humble	Thu, 11 July 2002 08:00
	Re: to bore or not to bore.....how to tell??	Corvid	Thu, 11 July 2002 08:28
	Re: to bore or not to bore.....how to tell??	Allan	Thu, 11 July 2002 09:36
	Re: to bore or not to bore.....how to tell??	ed_ma61	Thu, 11 July 2002 11:59
	Re: to bore or not to bore.....how to tell??	ed_ma61	Fri, 12 July 2002 04:34

Previous Topic:	Which is Better....
Next Topic:	flycut depth

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.