F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » to bore or not to bore.....how to tell?? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
ed_ma61 Forums Junkie Location: Lost in the K hole Registered: May 2002	Re: to bore or not to bore.....how to tell?? Thu, 11 July 2002 05:33 i checked the specs: maximum out of round or taper is 0,0008" or 0,02mm. (god knows how im going to measure that with any decent accuracy). my question is though, assuming i can measure it: im measuring the amount of taper down the cylinder bore with mesurements starting about 5mm from the block deck... ie: NOT including the dia of the 'ridge' at the top of the bore??? so if i start measuring just under that top 'ridge' and then measure down, im wanting a tolerance of under 0.02mm yeah? im guessing that the 'ridge' at the top of the cyl bore is not measured in the assesment of the bore? note: not that there's much of a ridge, but its obviously not as polished as the rest of the bore. cheers ed [Report message to a moderator]

	Subject	Poster	Date
	to bore or not to bore.....how to tell??	ed_ma61	Wed, 10 July 2002 12:01
	Re: to bore or not to bore.....how to tell??	gianttomato	Thu, 11 July 2002 01:24
	Re: to bore or not to bore.....how to tell??	ed_ma61	Thu, 11 July 2002 03:13
	Re: to bore or not to bore.....how to tell??	gianttomato	Thu, 11 July 2002 03:48
	Re: to bore or not to bore.....how to tell??	Corvid	Thu, 11 July 2002 04:28
	Re: to bore or not to bore.....how to tell??	ed_ma61	Thu, 11 July 2002 04:38
	Re: to bore or not to bore.....how to tell??	ed_ma61	Thu, 11 July 2002 04:45
	Re: to bore or not to bore.....how to tell??	gianttomato	Thu, 11 July 2002 05:16
	Re: to bore or not to bore.....how to tell??	ed_ma61	Thu, 11 July 2002 05:33
	Re: to bore or not to bore.....how to tell??	purpleminiep	Thu, 11 July 2002 06:10
	Re: to bore or not to bore.....how to tell??	humble	Thu, 11 July 2002 07:08
	Re: to bore or not to bore.....how to tell??	ed_ma61	Thu, 11 July 2002 07:37
	Re: to bore or not to bore.....how to tell??	humble	Thu, 11 July 2002 08:00
	Re: to bore or not to bore.....how to tell??	Corvid	Thu, 11 July 2002 08:28
	Re: to bore or not to bore.....how to tell??	Allan	Thu, 11 July 2002 09:36
	Re: to bore or not to bore.....how to tell??	ed_ma61	Thu, 11 July 2002 11:59
	Re: to bore or not to bore.....how to tell??	ed_ma61	Fri, 12 July 2002 04:34

Previous Topic:	Which is Better....
Next Topic:	flycut depth

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.