| Author | Topic |
|---|
Location:
Melbourne
Registered:
May 2002
|
|
Re: to bore or not to bore.....how to tell??
|
Thu, 11 July 2002 09:36
 
|
 |
yep scraped em both, at the time it looked as tho i was going to end up with a couple more M series engines but thay didnt eventuate,
the m and 5m blocks are exactly the same from what i could see if there was difference all the timing gear at the front would of been different so throw your m crank rods and 5m pistons in (pin hight is your only worry) and you end up with a bore:stroke ratio the same as the 1jz i HIGHLY suggest esp with a turbo engine you dont use a bored block thare are plenty of good 5m blocks that only need a light hone/deglaze out of the 5 M engines i have opened up only a couple have not still had visable factory crosshatch left, mind you hay have all been EFI supra engines maybe toyota grades the blocks for "sports use" and a granny driven engine will have worse ridges at the top then an engie that sees 5500+ often
anyway why are you worrying about this your geting one of the sexyest 5m-e blocks i have seen and that aqua color will give you an extra 10kw!!!
Allan
|
|
|
| | Subject | Poster | Date |
|---|
 |
to bore or not to bore.....how to tell??
|
ed_ma61 | Wed, 10 July 2002 12:01 |
|
Re: to bore or not to bore.....how to tell??
|
gianttomato | Thu, 11 July 2002 01:24 |
|
Re: to bore or not to bore.....how to tell??
|
ed_ma61 | Thu, 11 July 2002 03:13 |
|
Re: to bore or not to bore.....how to tell??
|
gianttomato | Thu, 11 July 2002 03:48 |
|
Re: to bore or not to bore.....how to tell??
|
Corvid | Thu, 11 July 2002 04:28 |
|
Re: to bore or not to bore.....how to tell??
|
ed_ma61 | Thu, 11 July 2002 04:38 |
|
Re: to bore or not to bore.....how to tell??
|
ed_ma61 | Thu, 11 July 2002 04:45 |
|
Re: to bore or not to bore.....how to tell??
|
gianttomato | Thu, 11 July 2002 05:16 |
|
Re: to bore or not to bore.....how to tell??
|
ed_ma61 | Thu, 11 July 2002 05:33 |
|
Re: to bore or not to bore.....how to tell??
|
purpleminiep | Thu, 11 July 2002 06:10 |
|
Re: to bore or not to bore.....how to tell??
|
humble | Thu, 11 July 2002 07:08 |
|
Re: to bore or not to bore.....how to tell??
|
ed_ma61 | Thu, 11 July 2002 07:37 |
|
Re: to bore or not to bore.....how to tell??
|
humble | Thu, 11 July 2002 08:00 |
|
Re: to bore or not to bore.....how to tell??
|
Corvid | Thu, 11 July 2002 08:28 |
|
Re: to bore or not to bore.....how to tell??
|
Allan | Thu, 11 July 2002 09:36 |
|
Re: to bore or not to bore.....how to tell??
|
ed_ma61 | Thu, 11 July 2002 11:59 |
|
Re: to bore or not to bore.....how to tell??
|
ed_ma61 | Fri, 12 July 2002 04:34 |
