F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » bent valves Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
earlyrolla Regular Location: Perth Registered: May 2003	Re: bent valves Sat, 23 August 2003 16:15 Even if you haven't run the engine yet, most of the oil will have run down into the sump. Don't be too worried about the wet/dry part. I would still to do one test first, then put a little oil down the bores and try again. It will be VERY obvious if you have bent the valves, like close to 0PSI. [Report message to a moderator]

	Subject	Poster	Date
	bent valves	ta2272	Sat, 23 August 2003 10:53
	Re: bent valves	earlyrolla	Sat, 23 August 2003 13:40
	Re: bent valves	ta2272	Sat, 23 August 2003 13:52
	Re: bent valves	wilbo666	Sat, 23 August 2003 14:49
	Re: bent valves	earlyrolla	Sat, 23 August 2003 16:15
	Re: bent valves	EMP-2TG	Sat, 23 August 2003 17:16
	Re: bent valves	blackRA28	Mon, 25 August 2003 09:30
	Re: bent valves	ta2272	Sat, 23 August 2003 22:59
	Re: bent valves	wilbo666	Sat, 23 August 2003 23:43
	Re: bent valves	earlyrolla	Sun, 24 August 2003 14:39
	Re: bent valves	ta2272	Mon, 25 August 2003 09:39
	Re: bent valves	draven	Mon, 25 August 2003 10:03
	Re: bent valves	earlyrolla	Mon, 25 August 2003 14:17
	Re: bent valves	ed_ma61	Mon, 25 August 2003 14:42
	Re: bent valves	earlyrolla	Tue, 26 August 2003 11:44
	Re: bent valves	ed_ma61	Tue, 26 August 2003 12:31

Previous Topic:	Decent NA rebuild
Next Topic:	7m Stock Cam Profile... *cool graphs*

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.