F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Crossmember/Chassis spacers Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Stefan Forums Junkie Location: Hobart, Tas Registered: May 2002	Re: Crossmember/Chassis spacers Mon, 25 August 2003 00:14 Bill Sherwood wrote on Mon, 25 August 2003 09:10 Bugger! I made a mistake - It'll LOWER the front roll centre, not raise it. The effect of that is to make the car understeer a little more on corner entry and oversteer on the exit. RCA's lift up the front roll centre to get it back to where it should be, in relation to the rear one to keep the handling good. That's what I meant. If whatever you did lowered the roll centre more, you need bigger RCAs... if it raised the roll centre more, you need smaller ones. Wow, what I said was actually right. Shit. (I'm waiting on some 30mm RCA blocks from a celicasupra group buy, hoping it will reduce front body roll and improve the handling further) [Report message to a moderator]

	Subject	Poster	Date
	Crossmember/Chassis spacers	Cool1	Sun, 24 August 2003 09:56
	Re: Crossmember/Chassis spacers	Bill Sherwood	Sun, 24 August 2003 11:58
	Re: Crossmember/Chassis spacers	Cool1	Sun, 24 August 2003 12:05
	Re: Crossmember/Chassis spacers	Stefan	Sun, 24 August 2003 12:28
	Re: Crossmember/Chassis spacers	Cool1	Sun, 24 August 2003 12:33
	Re: Crossmember/Chassis spacers	oldcorollas	Sun, 24 August 2003 13:09
	Re: Crossmember/Chassis spacers	Cool1	Sun, 24 August 2003 13:12
	Re: Crossmember/Chassis spacers	oldcorollas	Sun, 24 August 2003 13:18
	Re: Crossmember/Chassis spacers	Bill Sherwood	Sun, 24 August 2003 23:10
	Re: Crossmember/Chassis spacers	Stefan	Mon, 25 August 2003 00:14

Previous Topic:	3SGTE- loss of hp.
Next Topic:	CT12's are they cermaic or steel.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.