F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Which is Better.... Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
ed_ma61 Forums Junkie Location: Lost in the K hole Registered: May 2002	Re: Which is Better.... Fri, 12 July 2002 04:42 nishad 5mm longer conrod simply serves to compensate for the 5mm less stroke of the crank, brining the piston back up to deck height. in fact even if the tdc pisition of the piston in the bore is the same, thus giving the same combustion camber volume, the compression ratio will be less due to the decrease swept volume of the shorter stroke crank. cheers ed [Report message to a moderator]

	Subject	Poster	Date
	Which is Better....	ed_ma61	Thu, 11 July 2002 12:51
	Re: Which is Better....	Bill Sherwood	Thu, 11 July 2002 23:52
	Re: Which is Better....	ed_ma61	Fri, 12 July 2002 04:06
	Re: Which is Better....	humble	Fri, 12 July 2002 04:17
	Re: Which is Better....	gianttomato	Fri, 12 July 2002 04:37
	Re: Which is Better....	ed_ma61	Fri, 12 July 2002 04:42
	Re: Which is Better....	ed_ma61	Fri, 12 July 2002 04:49

Previous Topic:	Rebuild kit for 4agze
Next Topic:	to bore or not to bore.....how to tell??

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.