F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » bent valves Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
earlyrolla Regular Location: Perth Registered: May 2003	Re: bent valves Mon, 25 August 2003 14:17 Great to hear !!!! It generally takes a reasonable amount of pressure to bend valves. The 2TGEU motor I bought acutally bent all four intake valves after the top guide came loose (fell off). Unfortunately the design of the DOHC toyotas (all OHCs and DOHCs?) have very tight tolerances when it comes to valve timing. Had to fix a friends falcon ute once. Without a word of a lie, you can take the timing chain off and turn the motor over with no chance of the valves hitting the pistons. Gotta love the low comp and almost directly 'upright' overhead valve setup [Updated on: Mon, 25 August 2003 14:20] [Report message to a moderator]

	Subject	Poster	Date
	bent valves	ta2272	Sat, 23 August 2003 10:53
	Re: bent valves	earlyrolla	Sat, 23 August 2003 13:40
	Re: bent valves	ta2272	Sat, 23 August 2003 13:52
	Re: bent valves	wilbo666	Sat, 23 August 2003 14:49
	Re: bent valves	earlyrolla	Sat, 23 August 2003 16:15
	Re: bent valves	EMP-2TG	Sat, 23 August 2003 17:16
	Re: bent valves	blackRA28	Mon, 25 August 2003 09:30
	Re: bent valves	ta2272	Sat, 23 August 2003 22:59
	Re: bent valves	wilbo666	Sat, 23 August 2003 23:43
	Re: bent valves	earlyrolla	Sun, 24 August 2003 14:39
	Re: bent valves	ta2272	Mon, 25 August 2003 09:39
	Re: bent valves	draven	Mon, 25 August 2003 10:03
	Re: bent valves	earlyrolla	Mon, 25 August 2003 14:17
	Re: bent valves	ed_ma61	Mon, 25 August 2003 14:42
	Re: bent valves	earlyrolla	Tue, 26 August 2003 11:44
	Re: bent valves	ed_ma61	Tue, 26 August 2003 12:31

Previous Topic:	Decent NA rebuild
Next Topic:	7m Stock Cam Profile... *cool graphs*

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.