| Author | Topic |
|---|
Location:
Adelaide
Registered:
May 2002
|
|
Re: 100kw Inlet manifold not mating to head?!?!?! Please help :)
|
Tue, 26 August 2003 10:52
 
|
 |
Its not quite as simple as some have said.
There are three basic versions of the 4AGZE:
(1) MR2 which has Distributor, AFM and Bigport head.
(2) Early AE92 which has CAS/DLI, AFM and Bigport head.
(3) Late AE92 and AE101 which has CAS/DLI, MAP and Smallport head.
Now, if i understand you properly it comes down to a couple of things.
Is it the original 4AGZE head or has it been swapped? If its a 1991 4AGZE then it will be the Bigport head. In this case the 100kw manifold will work albeit not a good match by any standards.
Your options are these, use a FWD 86kw manifold (if its still going into the red rolla i remember) or swap the entire head and manifold for a 100kw version, beware though the cams are different.
Any more queries just ask away...
Rex
|
|
|
