| Author | Topic |
|---|
Location:
Gold Coast QLD
Registered:
August 2003
|
|
Re: SR20 Conversion Options
|
Thu, 28 August 2003 05:08
|
 |
How difficult is it gonna be to mod the tranny tunnel????
 I think I might leave that one to the experts if it needs to be done anyway. Oh and just to let you know, I just contacted a mate of mine (auto engineer) and he reckons swapping the cross members will do the trick for the sump so kudos for the idea. Much easier and cheaper than getting a sump fabricated. Also hanging a front mount of it is simple as. There are apparently 4 supports for the front grille. You cut out the two centers reinforce the two side ones and build a T bar between them mount the brackets for the intercooler off this and then reconnect the grill to the T bar at the top between the two supports. Its actually supposed to be stronger than the original supports however depending on the thickness of your cooler you might have to do a bit of bending. My sources tell me an oxy is the way to go for this
|
|
|
| | Subject | Poster | Date |
|---|
 |
SR20 Conversion Options
|
JimmySR20 | Wed, 27 August 2003 23:25 |
|
Re: SR20 Conversion Options
|
KiRK | Thu, 28 August 2003 00:17 |
|
Re: SR20 Conversion Options
|
justcallmefrank | Thu, 28 August 2003 00:19 |
|
Re: SR20 Conversion Options
|
Norbie | Thu, 28 August 2003 00:20 |
|
Re: SR20 Conversion Options
|
JimmySR20 | Thu, 28 August 2003 00:37 |
|
Re: SR20 Conversion Options
|
justcallmefrank | Thu, 28 August 2003 00:40 |
|
Re: SR20 Conversion Options
|
Norbie | Thu, 28 August 2003 02:39 |
|
Re: SR20 Conversion Options
|
JimmySR20 | Thu, 28 August 2003 03:01 |
|
Re: SR20 Conversion Options
|
Norbie | Thu, 28 August 2003 04:34 |
|
Re: SR20 Conversion Options
|
JimmySR20 | Thu, 28 August 2003 05:08 |
