| Author | Topic |
|---|
Location:
Brisbane
Registered:
May 2002
|
|
Re: turboing 18rgeu
|
Fri, 29 August 2003 00:55
|
 |
- 3T-GTEU injectors will do the job, but don't expect great results with the factory ECU.
- The oil pump is fine, but you may want to shim it for higher pressure. This is a fairly common mod.
- You don't need to drill any holes in the block. You can get a high-pressure oil feed from the same place as the oil light sender (just put a T-piece in there), and the return line goes back to the sump. Make sure the return line is large (about 1"), straight and flows as close to vertical as possible; the oil coming out of the turbo will be frothy and won't flow well.
- An oil cooler is a good idea, but this should be run inline with the oil filter. You can get kits to do this.
|
|
|
| | Subject | Poster | Date |
|---|
 |
turboing 18rgeu
|
Shaun | Tue, 26 August 2003 03:40 |
|
Re: turboing 18rgeu
|
Norbie | Tue, 26 August 2003 03:54 |
|
Re: turboing 18rgeu
|
Shaun | Tue, 26 August 2003 04:07 |
|
Re: turboing 18rgeu
|
roger | Tue, 26 August 2003 04:54 |
|
Re: turboing 18rgeu
|
TurboRG | Thu, 28 August 2003 18:08 |
|
Re: turboing 18rgeu
|
blackRA28 | Fri, 29 August 2003 00:27 |
|
Re: turboing 18rgeu
|
Norbie | Fri, 29 August 2003 00:55 |
