Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » how to eliminate lift-off oversteer in an ma61

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
saspeed
Occasional Poster


Location:
.
Registered:
July 2002
Re: how to eliminate lift-off oversteer in an ma61 Fri, 29 August 2003 17:34 Go to previous messageGo to previous message
Hello,

If i can throw in my two cents worth here's some advice,
There are two basic causes of lift-off oversteer;

1. Poor technique - Slow in/Fast out is the quickest way to get through a corner although it feels a little slow at first. You should be off the brakes and in the correct gear before turn-in. People who are overdriving a vehicle tend to come in too hot and roll around the apex which often results in oversteer.

Assuming your technique is ok.......

2. Front suspension too soft- In a left hand corner for example you will be tucking in the right front wheel thereby raising the left rear. Obviously your rear traction becomes limited due to only one tyre having proper road contact resulting in slide. To cure this you would need to have a look at front shock absorber condition and spring stiffness. Front swaybar changes should be considered after checking shocks/springs. On a race-car attempts are often made to increase front track width over rear track width using wheel spacers at front and introducing front negative camber. This would also help a lot as the contact patches of tyres are no longer square which prohibits the front wheel from tucking. There are other benefits from increased front track and negative camber also.

This advice comes from several years of circuit racing and the last three years teaching young people how to drive race-cars as part of a high-school racing program.I'm not saying it is the only answer but perhaps something you should consider.

Good luck and don't prang before you sort it out !!!!!!!
  Send a private message to this user    

SubjectPosterDate
Read Message   how to eliminate lift-off oversteer in an ma61 dravenThu, 28 August 2003 12:48
Read Message   Re: how to eliminate lift-off oversteer in an ma61 BlackSupraThu, 28 August 2003 12:55
Read Message   Re: how to eliminate lift-off oversteer in an ma61 dravenThu, 28 August 2003 20:04
Read Message   Re: how to eliminate lift-off oversteer in an ma61 EMP-2TGThu, 28 August 2003 13:02
Read Message   Re: how to eliminate lift-off oversteer in an ma61 gianttomatoThu, 28 August 2003 13:47
Read Message   Re: how to eliminate lift-off oversteer in an ma61 BlackSupraThu, 28 August 2003 14:07
Read Message   Re: how to eliminate lift-off oversteer in an ma61 oldcorollasThu, 28 August 2003 14:15
Read Message   Re: how to eliminate lift-off oversteer in an ma61 boudanThu, 28 August 2003 22:38
Read Message   Re: how to eliminate lift-off oversteer in an ma61 NarkThu, 28 August 2003 23:18
Read Message   Re: how to eliminate lift-off oversteer in an ma61 dravenFri, 29 August 2003 05:55
Read Message   Re: how to eliminate lift-off oversteer in an ma61 shinybluesteelFri, 29 August 2003 14:47
Read Message   Re: how to eliminate lift-off oversteer in an ma61 NorbieFri, 29 August 2003 01:06
Read Message   Re: how to eliminate lift-off oversteer in an ma61 shinybluesteelFri, 29 August 2003 01:22
Read Message   Re: how to eliminate lift-off oversteer in an ma61 StefanFri, 29 August 2003 03:21
Read Message   Re: how to eliminate lift-off oversteer in an ma61 StefanFri, 29 August 2003 03:09
Read Message   Re: how to eliminate lift-off oversteer in an ma61  saspeedFri, 29 August 2003 17:34
Read Message   Re: how to eliminate lift-off oversteer in an ma61 StefanSat, 30 August 2003 12:23
Read Message   Re: how to eliminate lift-off oversteer in an ma61 BlackSupraSat, 30 August 2003 12:27
Previous Topic:Removing over worn drums
Next Topic:GZ20 Soarer Seat Belt Holder

Goto Forum:
-=] Back to Top [=-

Current Time: Fri Jul 25 12:39:29 UTC 2025

Total time taken to generate the page: 0.0036609172821045 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.