F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Found Flow Limit on 1JZ Turbos Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
celicamad Forums Junkie Location: newcastle Registered: June 2002	Re: Found Flow Limit on 1JZ Turbos Mon, 01 September 2003 05:41 no ive never seen your turbos . maybe the turbo guy meant that they are rated to about 2 bar max boost pressure . i wouldnt doubt it .but i doubt they would still be within their effiency range if your going to fit twin dumps then why not try a seperate wastegate pipe . so two pipes off each turbo .with a seperator between the wastegate and the exhaust . this may elimate any flow problems from the wastegate . because the wastegate gas doesnt have to mix with the exhuast gas .and a lot of turbulence is also removed .you can rejoin into the rest of the system but make the wastegate runner at least 500mm long .this will give the wastegate air time to slow down before re entering the system therefore turbulence will be considerably reduced email me when you ready for controller celicamad@kooee.com.au [Updated on: Mon, 01 September 2003 05:56] [Report message to a moderator]

	Subject	Poster	Date
	Found Flow Limit on 1JZ Turbos	wastegate	Sun, 24 August 2003 09:44
	Re: Found Flow Limit on 1JZ Turbos		Sun, 24 August 2003 11:10
	Re: Found Flow Limit on 1JZ Turbos	7M-Brisbane	Sun, 24 August 2003 11:11
	Re: Found Flow Limit on 1JZ Turbos	wilbo666	Sun, 24 August 2003 11:36
	Re: Found Flow Limit on 1JZ Turbos	wastegate	Sun, 24 August 2003 11:37
	Re: Found Flow Limit on 1JZ Turbos	Celia-Sue	Mon, 25 August 2003 02:34
	Re: Found Flow Limit on 1JZ Turbos	justcallmefrank	Mon, 25 August 2003 02:42
	Re: Found Flow Limit on 1JZ Turbos	Celia-Sue	Mon, 25 August 2003 03:56
	Re: Found Flow Limit on 1JZ Turbos	wastegate	Mon, 25 August 2003 03:03
	Re: Found Flow Limit on 1JZ Turbos	wastegate	Mon, 25 August 2003 04:31
	Re: Found Flow Limit on 1JZ Turbos	CrAiGzEE	Mon, 25 August 2003 05:17
	Re: Found Flow Limit on 1JZ Turbos	Dabbid	Mon, 25 August 2003 09:35
	Re: Found Flow Limit on 1JZ Turbos	justcallmefrank	Mon, 25 August 2003 13:45
	Re: Found Flow Limit on 1JZ Turbos	Bugman	Mon, 25 August 2003 13:48
	Re: Found Flow Limit on 1JZ Turbos	HedgehogSandwich	Mon, 25 August 2003 15:30
	Re: Found Flow Limit on 1JZ Turbos	wastegate	Tue, 26 August 2003 01:41
	Re: Found Flow Limit on 1JZ Turbos		Tue, 26 August 2003 02:09
	Re: Found Flow Limit on 1JZ Turbos	HedgehogSandwich	Tue, 26 August 2003 10:31
	Re: Found Flow Limit on 1JZ Turbos	celicamad	Tue, 26 August 2003 12:55
	Re: Found Flow Limit on 1JZ Turbos	HedgehogSandwich	Tue, 26 August 2003 13:18
	Re: Found Flow Limit on 1JZ Turbos	wastegate	Wed, 27 August 2003 02:54
	Re: Found Flow Limit on 1JZ Turbos	celicamad	Wed, 27 August 2003 12:40
	Re: Found Flow Limit on 1JZ Turbos	wastegate	Wed, 27 August 2003 13:06
	Re: Found Flow Limit on 1JZ Turbos	celicamad	Fri, 29 August 2003 13:52
	Re: Found Flow Limit on 1JZ Turbos	HedgehogSandwich	Sun, 31 August 2003 11:42
	Re: Found Flow Limit on 1JZ Turbos	celicamad	Mon, 01 September 2003 05:41
	Re: Found Flow Limit on 1JZ Turbos		Sat, 30 August 2003 06:43
	Re: Found Flow Limit on 1JZ Turbos	7M-Brisbane	Sat, 30 August 2003 07:00
	Re: Found Flow Limit on 1JZ Turbos		Sat, 30 August 2003 07:29
	Re: Found Flow Limit on 1JZ Turbos	celicamad	Sun, 31 August 2003 00:33
	Re: Found Flow Limit on 1JZ Turbos	HedgehogSandwich	Mon, 01 September 2003 11:00

Previous Topic:	Sprinter and Trueno front..
Next Topic:	Power Steering Adapter for MA61/RA65

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.