F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » gze loom trouble in ae82 Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
sideshow Forums Junkie Location: sydney Registered: March 2003	Re: gze loom trouble in ae82 Mon, 01 September 2003 13:37 i have done em b4 u can just get the plugs on the ecu u have to undo the small bolt holding part of the loom on the side of the manifold then u pull abit on the loom the only prob is the ecu hangfs in bad spot best way is to drill a hole in middle of firewall just elow heater and beware of clutch hydraulic metal line [Report message to a moderator]

	Subject	Poster	Date
	gze loom trouble in ae82	twincam_ke20	Sun, 31 August 2003 13:42
	Re: gze loom trouble in ae82	MaNGeW	Mon, 01 September 2003 00:14
	Re: gze loom trouble in ae82	twincam_ke20	Mon, 01 September 2003 01:13
	Re: gze loom trouble in ae82	MaNGeW	Mon, 01 September 2003 12:16
	Re: gze loom trouble in ae82	twincam_ke20	Mon, 01 September 2003 13:35
	Re: gze loom trouble in ae82	sideshow	Mon, 01 September 2003 13:37
	Re: gze loom trouble in ae82	twincam_ke20	Mon, 01 September 2003 23:43

Previous Topic:	Looking for engine conversion into my gz10 soarer
Next Topic:	encoders VS crank angle sensors

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.