F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Qiuck shifter Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Youngy Forums Junkie Location: Eskilstuna, Sweden Registered: May 2002	Re: Qiuck shifter Wed, 03 September 2003 09:22 If your familiar with what the gear stick and mount looks like out of the box this explanation will be of use. Ok the gear stick has a pivot point that will get bolted into the gear box by a kind of cup (four bolts). So you have a kind of basic ball and socket arrangement. Below this pivot point is a small section of the gear stick that generally tapers down to another ball - smaller and distinct form the pivot point. This smaller ball fits into a cup of the selectors in the gear box (they normally have a urethane clip sort of thing to hold them in the cup of the selector). You cut off this smaller ball below the pivot point and do so right on the ball thus leaving the taper part from the pivot point. Then you weld in an extension of say 10-15mm (open to speculation, you can have more if you want that true rally shift on the cheap) and weld the smaller ball onto this extension. Clean up the welds and thus the distance between pivot point and selector ball has been increased. The consequence of this is you have to make up a spacer in the shape of the cup\plate that holds it in the box. Like this sort of thing: and Cheers [Updated on: Wed, 03 September 2003 09:23] [Report message to a moderator]

	Subject	Poster	Date
	Qiuck shifter	Bluewire	Sun, 31 August 2003 00:40
	Re: Qiuck shifter	mrshin	Sun, 31 August 2003 07:17
	Re: Qiuck shifter	Timmy Turbo	Sun, 31 August 2003 08:11
	Re: Qiuck shifter	Cool1	Sun, 31 August 2003 08:17
	Re: Qiuck shifter	Bugman	Sun, 31 August 2003 08:19
	Re: Qiuck shifter	justcallmefrank	Sun, 31 August 2003 08:19
	Re: Qiuck shifter	Bluewire	Wed, 03 September 2003 09:04
	Re: Qiuck shifter	Youngy	Wed, 03 September 2003 09:22
	Re: Qiuck shifter	hotrolla	Wed, 03 September 2003 10:18
	Re: Qiuck shifter	Steve M	Thu, 04 September 2003 00:14
	Re: Qiuck shifter	omegaman	Fri, 19 September 2003 00:45

Previous Topic:	gearbox change
Next Topic:	Question about conversion

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.