F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 1ggte - major hesitation under acceleration... Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
FKN16V Forums Junkie Location: NSW, East Coast Registered: July 2003	Re: 1ggte - major hesitation under acceleration... Mon, 08 September 2003 11:15 i had a similar prob with my 4age. i know there completley different motors but ill tell you my delimer. Any form of acceleration motor was hesitating like a bitch, until 4400rpm when the tvis opened. (More air was added) Turned out to be the dizzy was 2 teeth out, preventing the mechanic from setting the timing right, plus i had a small vacuamm leak on the inlet manifold, butthe main problem was that the throttle position sensor was also a degrees out. I bet if you check these few things, all might be well. If not try Grant from Sixworks, he's on Toymods, do a search Let me know how you go [Report message to a moderator]

	Subject	Poster	Date
	1ggte - major hesitation under acceleration...	KiRK	Sun, 07 September 2003 10:11
	Re: 1ggte - major hesitation under acceleration...	KiRK	Sun, 07 September 2003 23:33
	Re: 1ggte - major hesitation under acceleration...	gold28	Mon, 08 September 2003 00:19
	Re: 1ggte - major hesitation under acceleration...	KiRK	Mon, 08 September 2003 00:33
	Re: 1ggte - major hesitation under acceleration...	Nark	Mon, 08 September 2003 00:47
	Re: 1ggte - major hesitation under acceleration...	KiRK	Mon, 08 September 2003 00:54
	Re: 1ggte - major hesitation under acceleration...	gold28	Mon, 08 September 2003 02:38
	Re: 1ggte - major hesitation under acceleration...	KiRK	Mon, 08 September 2003 03:06
	Re: 1ggte - major hesitation under acceleration...	thechuckster	Mon, 08 September 2003 10:16
	Re: 1ggte - major hesitation under acceleration...	FKN16V	Mon, 08 September 2003 11:15
	Re: 1ggte - major hesitation under acceleration...	KiRK	Mon, 08 September 2003 23:25
	Re: 1ggte - major hesitation under acceleration...	Airbrushguy	Fri, 07 October 2005 15:43

Previous Topic:	KE55 Front Discs+Caliper Onto KE30
Next Topic:	Intercooler piping question?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.