Author | Topic |

Location: Rocky Mountains, Canada
Registered: May 2002
|
Re: 18R-C with Weber Carby won't idel
|
Fri, 12 September 2003 05:21
|
 |
The float levels shouldnt effect the idle.
They should only really effect when the mains come on.
What engine did the weber carb come off?
There is a good chance the primary idle jet is too small... youll want a primary idle jet of 45 or higher.
There are two idle jets on the carb, one is behind that idle mixture setting screw (just wind it all the way out), the other is on the opposite side of the carb (primary throat side) in the same position. Whats covering that jet will depend on the model of carb (might be a idle cutoff solenoid, might just be a screw, etc).
The size of the idle jets are stammped on the side of them.
Is the engines timing setup correctly too?
You should make sure this is ok first.
|
|
|
| Subject | Poster | Date |
 |
18R-C with Weber Carby won't idel
|
ra23celicachick | Sun, 07 September 2003 06:02 |
 |
Re: 18R-C with Weber Carby won't idel
|
munki | Sun, 07 September 2003 06:09 |
 |
Re: 18R-C with Weber Carby won't idel
|
roadrunner | Sun, 07 September 2003 08:10 |
 |
Re: 18R-C with Weber Carby won't idel
|
thechuckster | Sun, 07 September 2003 08:50 |
 |
Re: 18R-C with Weber Carby won't idel
|
earlyrolla | Sun, 07 September 2003 10:21 |
 |
Re: 18R-C with Weber Carby won't idel
|
oldcorollas | Sun, 07 September 2003 10:25 |
 |
Re: 18R-C with Weber Carby won't idel
|
ra23celicachick | Sun, 07 September 2003 22:28 |
 |
Re: 18R-C with Weber Carby won't idel
|
Jason | Sun, 07 September 2003 23:41 |
 |
Re: 18R-C with Weber Carby won't idel
|
Steve M | Mon, 08 September 2003 01:28 |
 |
Re: 18R-C with Weber Carby won't idel
|
ra23celicachick | Mon, 08 September 2003 02:39 |
 |
Re: 18R-C with Weber Carby won't idel
|
ra23celicachick | Thu, 11 September 2003 22:33 |
 |
Re: 18R-C with Weber Carby won't idel
|
roger | Fri, 12 September 2003 01:03 |
 |
Re: 18R-C with Weber Carby won't idel
|
CuRtana | Fri, 12 September 2003 01:12 |
 |
Re: 18R-C with Weber Carby won't idel
|
Jason | Fri, 12 September 2003 01:45 |
 |
Re: 18R-C with Weber Carby won't idel
|
ehendrikd | Fri, 12 September 2003 02:30 |
 |
Re: 18R-C with Weber Carby won't idel
|
CuRtana | Fri, 12 September 2003 04:02 |
 |
Re: 18R-C with Weber Carby won't idel
|
ehendrikd | Fri, 12 September 2003 04:13 |
 |
Re: 18R-C with Weber Carby won't idel
|
CuRtana | Fri, 12 September 2003 04:16 |
 |
Re: 18R-C with Weber Carby won't idel
|
ehendrikd | Fri, 12 September 2003 04:19 |
 |
Re: 18R-C with Weber Carby won't idel
|
CuRtana | Fri, 12 September 2003 04:23 |
 |
Re: 18R-C with Weber Carby won't idel
|
ra23celicachick | Fri, 12 September 2003 04:51 |
 |
Re: 18R-C with Weber Carby won't idel
|
ehendrikd | Fri, 12 September 2003 05:22 |
 |
Re: 18R-C with Weber Carby won't idel
|
M.W.P. | Fri, 12 September 2003 05:21 |