Author | Topic |
Location: Gold Coast
Registered: May 2002
|
Re: [Tech] Walbro install into Supra info here.
|
Sun, 14 September 2003 11:58
|
|
Remove the screws that hold the fuel pump backet in and remove with a slight twist. Make sure you know how it came out as you have to put it in the same way.
Fuel Tank with Stock Pump
Here is the Walbro installed on the bracket. I had to cut the bottom of the braket to open up the hole alittle so the walbro fits though. Take note of the wires because if you put the wires on the wrong way the pump goes backwards and the car doesn't run.
Here is the Walbro on the braket. With the wiring I just used spade terminals crimped onto the wiring. You will need to install the filter onto the bottom of the pump of course. Make sure the filter faces the same way as the old one otherwise you can't reinstall the pump.
|
|
|
| Subject | Poster | Date |
|
[Tech] Walbro install into Supra info here.
|
wastegate | Sun, 14 September 2003 11:58 |
|
Re: [Tech] Walbro install into Supra info here.
|
wastegate | Sun, 14 September 2003 11:58 |
|
Re: [Tech] Walbro install into Supra info here.
|
| Sun, 14 September 2003 12:19 |
|
Re: [Tech] Walbro install into Supra info here.
|
wastegate | Sun, 14 September 2003 12:25 |
|
Re: [Tech] Walbro install into Supra info here.
|
| Sun, 14 September 2003 12:29 |
|
Re: [Tech] Walbro install into Supra info here.
|
crazy_camry | Sun, 14 September 2003 12:30 |
|
Re: [Tech] Walbro install into Supra info here.
|
| Sun, 14 September 2003 12:33 |
|
Re: [Tech] Walbro install into Supra info here.
|
crazy_camry | Sun, 14 September 2003 12:36 |
|
Re: [Tech] Walbro install into Supra info here.
|
Norbie | Sun, 14 September 2003 12:43 |
|
Re: [Tech] Walbro install into Supra info here.
|
crazy_camry | Sun, 14 September 2003 12:53 |