Toymods Car Club Inc: Tech & Conversions => 4age flywheel problem

Toymods Car Club
www.toymods.org.au

F.A.Q.

Home

Members

Toymods » Tech & Conversions » 4age flywheel problem Show: Today's Posts :: Show Polls Email to friend

Author

Topic

shindeokure
Regular

Location:
melbourne
Registered:
September 2003

Re: clutch kit selection

Sun, 14 September 2003 13:11

Quote:

Flywheels & clutches
The flywheels on all the 4AGE's are held on with eight extremely high quality bolts. They are fine for all amounts of power. The AE-86 flywheel is a little smaller than the others, and so is the clutch assembly. In fact the clutch on the AE-86's 4AGE is exactly the same as the single cam 4AC. Not entirely sure if that's a good thing, but it seems to last okay and makes it pretty cheap & easy to get new ones. FWIW, I think that the 3TGTE clutch assembly should bolt straight on, and if so, it would be a good thing as they can take 160ft-lbs of torque - A lot more than the 4AGE clutch is designed for.
The other 4AGE's have a flywheel & clutch that is about 12mm larger in diameter, and so they are not interchangeable with the AE-86 unit.

( http://www.billzilla.org/4agstock3.htm )

ok.. so it is a rwd 4age flywheel.
now, should i use it? or buy a 200mm flywheel?
does anyone know if it would make any difference, performance wise?
can anyone confirm that the 3tgte clutch kit will fit?
part number?

does anyone in melbourne have a 200mm one lying around that they wouldn't mind giving me?

[Updated on: Sun, 14 September 2003 13:14]

[Report message to a moderator]

[Message index]

-=] Back to Top [=-

Current Time: Wed Dec 25 19:15:01 UTC 2024

Total time taken to generate the page: 0.0059890747070312 seconds

.:: Contact :: Home ::.