F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » engines in RA28 Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
gold28 Forums Junkie Location: Madrid - Spain Registered: August 2002	Re: engines in RA28 Thu, 18 September 2003 00:17 150rwkw is very doable with a 1G. My gen2 is running at 10psi (gen3's use 11psi as standard), has standard GA70 intercooler and 2.5in mandrel exhaust including a muffler. It puts out 120rwkw. A better intercooler will give you less of a pressure drop, meaning that you can get the boost you want at the inlet without pushing the turbo's any harder than necessary. Most people use a 3in straight through exhaust, but I like my cars a bit on the quiet side. Mine is a daily driver. Apparently bigger exhaust on a turbo car gives better power and turbo spool up. I guess it all depends on what your after. Custom Y pipes from what I am told is very difficult on these motors because of how close the turbo's sit. If you figure out how to do one, I am sure a lot of people would be very interested. I know they make good gains on a 1JZ. [Report message to a moderator]

	Subject	Poster	Date
	engines in RA28	Lambolica	Tue, 16 September 2003 13:24
	Re: engines in RA28	Nark	Wed, 17 September 2003 00:10
	Re: engines in RA28	gold28	Wed, 17 September 2003 00:18
	Re: engines in RA28	Lambolica	Wed, 17 September 2003 03:19
	Re: engines in RA28	gold28	Wed, 17 September 2003 03:31
	Re: engines in RA28	Lambolica	Wed, 17 September 2003 03:59
	Re: engines in RA28	Norbie	Wed, 17 September 2003 04:33
	Re: engines in RA28	Lambolica	Wed, 17 September 2003 04:37
	Re: engines in RA28	Nark	Wed, 17 September 2003 05:01
	Re: engines in RA28	Aussie	Wed, 17 September 2003 16:52
	Re: engines in RA28	Nark	Wed, 17 September 2003 23:25
	Re: engines in RA28	cs01_510	Thu, 18 September 2003 00:16
	Re: engines in RA28	gold28	Thu, 18 September 2003 00:17
	Re: engines in RA28	cs01_510	Thu, 18 September 2003 00:22
	Re: engines in RA28	Lambolica	Thu, 18 September 2003 00:40
	Re: engines in RA28	cs01_510	Thu, 18 September 2003 00:30
	Re: engines in RA28	cs01_510	Thu, 18 September 2003 01:15
	Re: engines in RA28	Lambolica	Thu, 18 September 2003 02:09
	Re: engines in RA28	Lambolica	Thu, 18 September 2003 02:13
	Re: engines in RA28	Timmy Turbo	Thu, 18 September 2003 01:59
	Re: engines in RA28	gold28	Thu, 18 September 2003 06:25
	Re: engines in RA28	Lambolica	Thu, 18 September 2003 06:31
	Re: engines in RA28	Norbie	Thu, 18 September 2003 06:28
	Re: engines in RA28	gold28	Thu, 18 September 2003 06:35
	Re: engines in RA28	Lambolica	Thu, 18 September 2003 06:41
	Re: engines in RA28	gold28	Thu, 18 September 2003 21:32

Previous Topic:	How much would you pay for an ra23?
Next Topic:	Cusco 2-Way LSD Replacement

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.