| Author | Topic |
|---|
Location:
Eastern Sydney
Registered:
May 2002
|
|
Re: AE86 RCA
|
Wed, 17 July 2002 20:55
 
|
 |
I'll say it again,if you have strut tops coming,these are the best solution.
have you considered the extra loading on the ball joint that offsetting the strut on the knuckle will give? instead of all the impact shock of bumps going straight up it's centreline,every time you hit a bump,the load will try and bend the ball joint,as the stub axle has been offset at least an inch to the outside of the normal position to gain you a useful amount of camber change.
I reckon a modified control arm is a hell of a lot safer than using offset RCAs.
if you don't want to modify an arm,I suggest you head down to your local wrecker with some measuring equipment and start looking at celica front ends for a donor lower arm. RA40 bits might work. people have used sigma arms in the past as well I believe.
Justin...
|
|
|
