| Author | Topic |
|---|
Location:
Perth
Registered:
September 2002
|
|
Re: 6mge front main oil seal
|
Fri, 19 September 2003 15:19
 
|
 |
| supra1978 wrote on Fri, 19 September 2003 06:49 |
Probably the hardest part of this job is removing the crank-pulley bolt! You'll need plenty of leverage (unless you own a mighty rattle gun). The rest of the job is easy. Definitely need a gear puller for the crank-pulley.
|
actually the timing gear pulley was the hardest of the lot, we actually needed a puller to get it off, although it did only take 10 secs
the crank bolt was easy, just brace a breaker bar against the chassis, and crank the motor over once. easy
and the crank pulley actually can off by hand!! NO force was needed
|
|
|
| | Subject | Poster | Date |
|---|
 |
6mge front main oil seal
|
Cressida Supra | Thu, 18 September 2003 14:39 |
|
Re: 6mge front main oil seal
|
gianttomato | Thu, 18 September 2003 22:16 |
|
Re: 6mge front main oil seal
|
supra1978 | Thu, 18 September 2003 22:49 |
|
Re: 6mge front main oil seal
|
gianttomato | Thu, 18 September 2003 23:21 |
|
Re: 6mge front main oil seal
|
Cressida Supra | Fri, 19 September 2003 15:19 |
|
Re: 6mge front main oil seal
|
gianttomato | Fri, 19 September 2003 19:25 |
|
Re: 6mge front main oil seal
|
Cressida Supra | Sun, 21 September 2003 08:46 |
|
Re: 6mge front main oil seal
|
ed_ma61 | Fri, 19 September 2003 06:58 |
|
Re: 6mge front main oil seal
|
Cressida Supra | Fri, 19 September 2003 07:03 |
|
Re: 6mge front main oil seal
|
dingaling | Fri, 19 September 2003 14:43 |
|
Re: 6mge front main oil seal
|
Cressida Supra | Fri, 19 September 2003 15:15 |
|
Re: 6mge front main oil seal
|
ed_ma61 | Sat, 20 September 2003 07:04 |
|
Re: 6mge front main oil seal
|
ed_ma61 | Sat, 20 September 2003 07:05 |
|
Re: 6mge front main oil seal
|
draven | Fri, 19 September 2003 14:56 |
|
Re: 6mge front main oil seal
|
justcallmefrank | Sun, 21 September 2003 13:26 |
