F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Idle Air Control valve Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
KDog Regular Location: ACT Registered: July 2002	Re: Idle Air Control valve Fri, 26 September 2003 05:31 Ok found some delco wiring diagrams. The motor is a bipolar drive, so I need to convert it into a unipolar steeper motor (Toyota type). Actually from memory you may be able to convert the toyo one to work straight onto the delco. You can convert unipolars into bipolars by ignoring the power wires. It may be worth a try. I don't have a wiring diagram in front of me but from memory the wires for the toyo IAC are as follows; Power for motor is Black/red should be two of these going into IAC, leave them disconnected. OK for delco coil A high we will connect the toyo IAC yellow wire. for delco coil A low we will connect the toyo IAC yellow/green wire. OK for delco coil B high we will connect the toyo IAC yellow/red OK for delco coil B low we will connect the toyo IAC yellow/blue. I think this is right, give it a try and let me know how it goes. Cheers [Report message to a moderator]

	Subject	Poster	Date
	Idle Air Control valve	SupraPete	Thu, 25 September 2003 03:08
	Re: Idle Air Control valve	Allan	Thu, 25 September 2003 10:22
	Re: Idle Air Control valve	SupraPete	Thu, 25 September 2003 23:42
	Re: Idle Air Control valve	SupraPete	Fri, 26 September 2003 04:40
	Re: Idle Air Control valve	KDog	Fri, 26 September 2003 04:51
	Re: Idle Air Control valve	SupraPete	Fri, 26 September 2003 05:05
	Re: Idle Air Control valve	KDog	Fri, 26 September 2003 05:31
	Re: Idle Air Control valve	SupraPete	Fri, 26 September 2003 05:38
	Re: Idle Air Control valve	KDog	Fri, 26 September 2003 05:47
	Re: Idle Air Control valve	SupraPete	Fri, 26 September 2003 05:55
	Re: Idle Air Control valve	Danish	Fri, 26 September 2003 08:09
	Re: Idle Air Control valve	gold28	Tue, 30 September 2003 23:19
	Re: Idle Air Control valve	roger	Tue, 30 September 2003 23:43
	Re: Idle Air Control valve	SupraPete	Wed, 01 October 2003 01:50
	Re: Idle Air Control valve	gold28	Wed, 01 October 2003 03:10

Previous Topic:	ECU programming/mapping
Next Topic:	18r-g...NEED HELP with emission system!!!! PleasE!!

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.