F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Idle Air Control valve Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
gold28 Forums Junkie Location: Madrid - Spain Registered: August 2002	Re: Idle Air Control valve Tue, 30 September 2003 23:19 Sounds like you don't need to know this now, but only some alloys of aluminium can be welded. any 6000 series can be welded. This is most likely what you will be using. Bonding aluminium can give you good results. Scuff and degrease the fay surfaces and bond with an epoxy type adhesive. It is a surface bond so it is very important that the surfaces are very clean and properly degreased. If you want a really good bond, anodising or pickling the surface improves the bond strength. [Report message to a moderator]

	Subject	Poster	Date
	Idle Air Control valve	SupraPete	Thu, 25 September 2003 03:08
	Re: Idle Air Control valve	Allan	Thu, 25 September 2003 10:22
	Re: Idle Air Control valve	SupraPete	Thu, 25 September 2003 23:42
	Re: Idle Air Control valve	SupraPete	Fri, 26 September 2003 04:40
	Re: Idle Air Control valve	KDog	Fri, 26 September 2003 04:51
	Re: Idle Air Control valve	SupraPete	Fri, 26 September 2003 05:05
	Re: Idle Air Control valve	KDog	Fri, 26 September 2003 05:31
	Re: Idle Air Control valve	SupraPete	Fri, 26 September 2003 05:38
	Re: Idle Air Control valve	KDog	Fri, 26 September 2003 05:47
	Re: Idle Air Control valve	SupraPete	Fri, 26 September 2003 05:55
	Re: Idle Air Control valve	Danish	Fri, 26 September 2003 08:09
	Re: Idle Air Control valve	gold28	Tue, 30 September 2003 23:19
	Re: Idle Air Control valve	roger	Tue, 30 September 2003 23:43
	Re: Idle Air Control valve	SupraPete	Wed, 01 October 2003 01:50
	Re: Idle Air Control valve	gold28	Wed, 01 October 2003 03:10

Previous Topic:	ECU programming/mapping
Next Topic:	18r-g...NEED HELP with emission system!!!! PleasE!!

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.