| Author | Topic |
|---|
I supported Toymods
Location:
Ademelaide, SA
Registered:
July 2003
|
|
Re: RWD 4AGE
|
Wed, 01 October 2003 10:45
 
|
 |
ahem....
well, having done this conversion many times, i can tell you that it is one of the easiest to do....
first up. the 4A-GE will bolt in using the normal engine mounts found on a RWD 4A engine. the only problem is, it will be solid mounted, meaning no engine mount rubbers...you CAN fit one piece of rubber, about 3mm thick, on each side, but it will be tight.
OR... you can fabricate mounts which bolt to the engine block, that use the standard sprinter rubbers. i have a set of fabricated mounts if you want to buy them from me, but it will set you back $75 plus postage....
the gearbox crossmember to use is the KE30/55 corolla one, but you need to spin it around, so the left hand side is on the right of the car.
you will need to get a tailshaft made up to suit, also.
the easiest thing to do for a radiator, is to use yours, if it is in ok condition. it has more than enough cooling capacity. but you will need to get it modified, so that both outlets are on the drivers side. this should cost around $20 at any radiator shop.
that's the basic mechanicals out of the way....that should get you started..
|
|
|
| | Subject | Poster | Date |
|---|
 |
RWD 4AGE
|
79rollaboy | Wed, 01 October 2003 06:55 |
|
Re: RWD 4AGE
|
gtman | Wed, 01 October 2003 07:29 |
|
Re: RWD 4AGE
|
79rollaboy | Wed, 01 October 2003 07:32 |
|
Re: RWD 4AGE
|
gtman | Wed, 01 October 2003 07:40 |
|
Re: RWD 4AGE
|
79rollaboy | Wed, 01 October 2003 07:43 |
|
Re: RWD 4AGE
|
gtman | Wed, 01 October 2003 07:44 |
|
Re: RWD 4AGE
|
79rollaboy | Wed, 01 October 2003 07:45 |
|
Re: RWD 4AGE
|
gtman | Wed, 01 October 2003 07:58 |
|
Re: RWD 4AGE
|
79rollaboy | Wed, 01 October 2003 08:00 |
|
Re: RWD 4AGE
|
79rollaboy | Wed, 01 October 2003 08:11 |
|
Re: RWD 4AGE
|
GZE-STYLE | Wed, 01 October 2003 09:18 |
|
Re: RWD 4AGE
|
79rollaboy | Wed, 01 October 2003 10:31 |
|
Re: RWD 4AGE
|
Steve-AE86 | Wed, 01 October 2003 10:45 |
|
Re: RWD 4AGE
|
79rollaboy | Wed, 01 October 2003 11:38 |
|
Re: RWD 4AGE
|
SLY16V | Thu, 02 October 2003 07:13 |
|
Re: RWD 4AGE
|
79rollaboy | Mon, 06 October 2003 07:15 |
|
Re: RWD 4AGE
|
SLY16V | Mon, 06 October 2003 08:59 |
