| Author | Topic |
|---|
Location:
Syndey
Registered:
December 2002
|
|
Re: Microtech MTX-12 on 4agze, yes or no?
|
Wed, 01 October 2003 22:49
|
 |
MTX12 is a over kill for a 4age, but it will work if you have one,
i have done heaps of them with LT8's using the stock coil/igniter setup, on a GTE i would use a LTX8 with coil packs,
alot of idle problems are due to people not setting the TPS correctly, what this does it makes the car use the load map not the idle map (in matrix mode this is less of a issue)
NOS4ag,
you didnt need to buy a new tps, you can adjust the settings in the TPSCAL screen,
cold start is a problem if you remove all the idle up stuff from the bottom of the throttle body, if you leave it there you will have no problems with the stock cold settings, also the newer LT's have a lot more cold tuning which makes it a lot easier to get it right,
BTW the MT series are no longer made, they have been replaced with the LT series which is about to be replaced by the LTs series
Dale
|
|
|
| | Subject | Poster | Date |
|---|
 |
Microtech MTX-12 on 4agze, yes or no?
|
twincam_ke20 | Tue, 30 September 2003 10:03 |
|
Re: Microtech MTX-12 on 4agze, yes or no?
|
tin can | Tue, 30 September 2003 10:09 |
|
Re: Microtech MTX-12 on 4agze, yes or no?
|
sideshow | Tue, 30 September 2003 11:01 |
|
Re: Microtech MTX-12 on 4agze, yes or no?
|
nos4ag | Wed, 01 October 2003 10:24 |
|
Re: Microtech MTX-12 on 4agze, yes or no?
|
nos4ag | Wed, 01 October 2003 10:26 |
|
Re: Microtech MTX-12 on 4agze, yes or no?
|
10sec_rx7 | Wed, 01 October 2003 22:49 |
