| Author | Topic |
|---|
Location:
Brisbane
Registered:
May 2002
|
|
Re: Supercharging a carby 3T-C
|
Thu, 02 October 2003 02:26
 
|
 |
The SC12 (4A-GZE supercharger) is a positive displacement type blower, which means it displaces a fixed volume of air (1.2 litres in this case) per revolution. This means if you attempt to use it in a blow-through setup you'll blow your inlet pipes to smithereens or bend the throttle plate like a pretzel the first time you start it up. The correct way to do it is as a suck-through system, ie carby before the blower.
Yes it can be done and would probably work OK if you don't have high expectations, but I wouldn't bother unless you have good metal fabrication skills and can slap it together yourself on the cheap. If you're going to pay someone else to do it for you, it will cost you way more than it's worth.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Supercharging a carby 3T-C
|
Mr 20Valve | Thu, 02 October 2003 01:53 |
|
Re: Supercharging a carby 3T-C
|
roger | Thu, 02 October 2003 02:03 |
|
Re: Supercharging a carby 3T-C
|
Norbie | Thu, 02 October 2003 02:26 |
|
Re: Supercharging a carby 3T-C
|
roger | Thu, 02 October 2003 23:56 |
|
Re: Supercharging a carby 3T-C
|
Mr 20Valve | Thu, 02 October 2003 04:12 |
|
Re: Supercharging a carby 3T-C
|
Norbie | Thu, 02 October 2003 04:23 |
|
Re: Supercharging a carby 3T-C
|
Mr 20Valve | Thu, 02 October 2003 05:27 |
|
Re: Supercharging a carby 3T-C
|
Mr 20Valve | Thu, 02 October 2003 05:31 |
|
Re: Supercharging a carby 3T-C
|
Norbie | Thu, 02 October 2003 06:11 |
|
Re: Supercharging a carby 3T-C
|
Mr 20Valve | Thu, 02 October 2003 06:41 |
|
Re: Supercharging a carby 3T-C
|
Classique71 | Thu, 02 October 2003 08:32 |
|
Re: Supercharging a carby 3T-C
|
Norbie | Thu, 02 October 2003 11:58 |
|
Re: Supercharging a carby 3T-C
|
Norbie | Fri, 03 October 2003 00:05 |
|
Re: Supercharging a carby 3T-C
|
Mr 20Valve | Fri, 03 October 2003 01:44 |
|
Re: Supercharging a carby 3T-C
|
Norbie | Fri, 03 October 2003 01:52 |
|
Re: Supercharging a carby 3T-C
|
Mr 20Valve | Fri, 03 October 2003 02:57 |
|
Re: Supercharging a carby 3T-C
|
Norbie | Fri, 03 October 2003 06:36 |
|
Re: Supercharging a carby 3T-C
|
roger | Fri, 03 October 2003 06:50 |
|
Re: Supercharging a carby 3T-C
|
raw_2t_power | Fri, 03 October 2003 09:20 |
|
Re: Supercharging a carby 3T-C
|
Mr 20Valve | Sun, 05 October 2003 22:55 |
|
Re: Supercharging a carby 3T-C
|
roger | Sun, 05 October 2003 23:53 |
