Author | Topic |
Location: Brisbane
Registered: May 2002
|
Re: Supercharging a carby 3T-C
|
Thu, 02 October 2003 06:11
|
|
Yes you could use the original 3T carby, but it would be a significant bottleneck since you will be dramatically increasing the engine's airflow capability. That's why I suggested the larger XE Falcon carby.
Don't be dodgy about your inlet piping - remember it will be pressurised so duct tape is unlikely to hold. Get an exhaust shop to fabricate a pipe for you; it shouldn't cost much if you shop around.
Forget about the clutch if you want to keep this cheap and simple. Just leave it permanently engaged.
|
|
|
| Subject | Poster | Date |
|
Supercharging a carby 3T-C
|
Mr 20Valve | Thu, 02 October 2003 01:53 |
|
Re: Supercharging a carby 3T-C
|
roger | Thu, 02 October 2003 02:03 |
|
Re: Supercharging a carby 3T-C
|
Norbie | Thu, 02 October 2003 02:26 |
|
Re: Supercharging a carby 3T-C
|
roger | Thu, 02 October 2003 23:56 |
|
Re: Supercharging a carby 3T-C
|
Mr 20Valve | Thu, 02 October 2003 04:12 |
|
Re: Supercharging a carby 3T-C
|
Norbie | Thu, 02 October 2003 04:23 |
|
Re: Supercharging a carby 3T-C
|
Mr 20Valve | Thu, 02 October 2003 05:27 |
|
Re: Supercharging a carby 3T-C
|
Mr 20Valve | Thu, 02 October 2003 05:31 |
|
Re: Supercharging a carby 3T-C
|
Norbie | Thu, 02 October 2003 06:11 |
|
Re: Supercharging a carby 3T-C
|
Mr 20Valve | Thu, 02 October 2003 06:41 |
|
Re: Supercharging a carby 3T-C
|
Classique71 | Thu, 02 October 2003 08:32 |
|
Re: Supercharging a carby 3T-C
|
Norbie | Thu, 02 October 2003 11:58 |
|
Re: Supercharging a carby 3T-C
|
Norbie | Fri, 03 October 2003 00:05 |
|
Re: Supercharging a carby 3T-C
|
Mr 20Valve | Fri, 03 October 2003 01:44 |
|
Re: Supercharging a carby 3T-C
|
Norbie | Fri, 03 October 2003 01:52 |
|
Re: Supercharging a carby 3T-C
|
Mr 20Valve | Fri, 03 October 2003 02:57 |
|
Re: Supercharging a carby 3T-C
|
Norbie | Fri, 03 October 2003 06:36 |
|
Re: Supercharging a carby 3T-C
|
roger | Fri, 03 October 2003 06:50 |
|
Re: Supercharging a carby 3T-C
|
raw_2t_power | Fri, 03 October 2003 09:20 |
|
Re: Supercharging a carby 3T-C
|
Mr 20Valve | Sun, 05 October 2003 22:55 |
|
Re: Supercharging a carby 3T-C
|
roger | Sun, 05 October 2003 23:53 |