F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » efi conversion for 18rg Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
roger Regular Registered: June 2002	Re: efi conversion for 18rg Fri, 03 October 2003 06:42 (Writing this before norbie got in so I have said the same) If you use an electronic dizzy then yes you will need an ignition module and electronic coil to match. As you have points your standard coil will work with the efi system you have. Check you are getting power to the injectors with a multimeter? I assume the 18rg you have has low impedence injectors ie 2-4 ohms. And that the 22re loom has the ballast resistor in the loom? From the diagrams I have seen I have noted that the Manual Transimion(MT) NSW is earthed. If you have an auto transmision loom it is quite possible that this is not happening check it with a multimeter. Check your wiring. I have also found that the ignition breaks down at high revs like norbie. This same phenomon happens when you use a points coil on an electronic dizzy. Perhaps this may be a mis match between the efi system and the coil type but it still works non the less. [Updated on: Fri, 03 October 2003 06:47] [Report message to a moderator]

	Subject	Poster	Date
	efi conversion for 18rg	airfireman1	Tue, 30 September 2003 12:44
	Re: efi conversion for 18rg	Norbie	Tue, 30 September 2003 12:51
	Re: efi conversion for 18rg	chrisss	Wed, 01 October 2003 07:02
	Re: efi conversion for 18rg	Norbie	Wed, 01 October 2003 12:15
	Re: efi conversion for 18rg	wil8115	Thu, 02 October 2003 05:47
	Re: efi conversion for 18rg	RA28midge	Fri, 03 October 2003 03:00
	Re: efi conversion for 18rg	wil8115	Fri, 03 October 2003 04:27
	Re: efi conversion for 18rg	RA28midge	Fri, 03 October 2003 06:01
	Re: efi conversion for 18rg	roger	Fri, 03 October 2003 06:42
	Re: efi conversion for 18rg	wil8115	Sat, 04 October 2003 08:31
	Re: efi conversion for 18rg	Norbie	Fri, 03 October 2003 06:22
	Re: efi conversion for 18rg	THE WITZL	Fri, 03 October 2003 08:16
	Re: efi conversion for 18rg	roger	Mon, 06 October 2003 01:17
	Re: efi conversion for 18rg	oldcorollas	Mon, 06 October 2003 02:19
	Re: efi conversion for 18rg	roger	Mon, 06 October 2003 04:09

Previous Topic:	1JZ Still breaking down under boost
Next Topic:	Coilovers and helper / keeper springs?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.