| Author | Topic |
|---|
I supported Toymods
Location:
melbourne.victoria.austra...
Registered:
June 2002
|
|
Re: 4ag oil cooler
|
Mon, 06 October 2003 21:41
 
|
 |
my 4AGE is running a 1118 earls adaptor which bolts to the block - this then has a hose which travels to a remote filter mount (ford z9 or std 2T filter) which then goes to an oil cooler mounted up the front. from the opposite end of the oil cooler, oil returns back to the 1118 adaptor on the block.
these setups are not cheap. when you start adding up hoses at over $20 per meter, it gets quite expensive. but worth it in my mind - cheap insurance.
jonny - you could use the 100kw type setup on your 2T - earls say that the 1118 is supposed to fit the 2T - sure it screws into the block, but, its about 2-3mm not wide enough so the rubber seal doesn't seal up. i have one of these 100kw type bypass sandwich things if you're interested - i won't be needing it.
|
|
|
| | Subject | Poster | Date |
|---|
 |
4ag oil cooler
|
RSSTi | Mon, 06 October 2003 08:31 |
|
Re: 4ag oil cooler
|
Grega | Mon, 06 October 2003 09:30 |
|
Re: 4ag oil cooler
|
RSSTi | Mon, 06 October 2003 11:13 |
|
Re: 4ag oil cooler
|
Jonny2TG | Mon, 06 October 2003 11:33 |
|
Re: 4ag oil cooler
|
TE72_Turbo | Mon, 06 October 2003 11:53 |
|
Re: 4ag oil cooler
|
Jonny2TG | Mon, 06 October 2003 12:15 |
|
Re: 4ag oil cooler
|
TE72_Turbo | Mon, 06 October 2003 12:30 |
|
Re: 4ag oil cooler
|
BigWorm | Mon, 06 October 2003 15:51 |
|
Re: 4ag oil cooler
|
RSSTi | Tue, 07 October 2003 08:24 |
|
Re: 4ag oil cooler
|
Grega | Mon, 06 October 2003 21:41 |
|
Re: 4ag oil cooler
|
BigWorm | Tue, 07 October 2003 14:35 |
|
Re: 4ag oil cooler
|
RSSTi | Wed, 08 October 2003 07:32 |
