| Author | Topic |
|---|
I supported Toymods
Location:
melbourne
Registered:
June 2002
|
|
Re: How to pull an ae86 dash apart. (Anyone have any manual they can scan plz?)
|
Fri, 10 October 2003 01:31
 
|
 |
its quite easy, ill do a quick run through with the hard bit.
undo all the screws you can find, not many are hidden, the three under the unstrament hood spring to mind.
the bit you may be stuck on is this:
pull off the headlight turny switch and the windscreen wiper turny switch, and undo the nuts that hold them in place, these also attatch the dash to the frame or whatever. you can do these with the genuine toyota crescent spanners, or any one will do. otherwise you'll need a long socket to clear the rotary switch stalks. from memory the were 17mm, but measure it to be safe.
glovebox is a piece of pis to get off, you maye be able to get at your HVAC controls just from here, but take your whole dash out, because i just told you how
there isa full chassis manual on this site, i'm surprised more people dont realise this. its in gallery:techdocs or something, im going to print it out soon.
good luck!
|
|
|
