Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » ke55 5k conversion

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
oldcorollas
Forums Junkie


Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
 
Re: ke55 5k conversion Mon, 13 October 2003 10:03 Go to previous messageGo to previous message
34/34 weber, 24/27 chokes, 150/150 mains with 170 air correctors.

camtech 609 regrind, shave rocker towers 2.5mm, dual valve springs (like from www.performancesprings.com.au)
3K bigport head, or a stock 3K head (free 10:1 CR)
port the exhaust 1.5-2mm on walls and roof of port, make intakes about 30mm diameter (bigport has 30's stock, normal 3K has 27mm stock)
unshroud valves in combustion chamber, smooth sharp edges.
NGK BP6ES (or Y) plugs

ACL 40 or 60 thou OS pistons (don't use the Repcos, they crack)
balance rods (end for end and total) to 0.1 grams. balance pistons and pins to 0.1 grams, balance crank dynamically.

4-2-1 extractors, primary and secondary 1.25 feet long, 2.5 foot collector into 2" exhaust a couple of resonators and a big NON-straight thru muffler.....

this will be noticeably better than stock, and will put down around 47-48rwkw@8000rpm on Toymods dyno...

much more fun and if balanced properly etc, will rev all day to 7000rpm.....

use mobil 1 or similar synthetic oil and change regularly, and motor should last a while too....

can bore 4K out to 60 thou over (1.5mm) but much more is anyones guess. you can bore a 3K out 3 or maybe 4mm, but 4K has thinner bore walls.

if you are after real performance, go the 4AG etc, but if you are after some cheap expendable fun that will scare afew commondores, then the above mods should be ok..

Cya, Stewart
  Send a private message to this user    

SubjectPosterDate
Read Message   ke55 5k conversion bennySun, 12 October 2003 10:46
Read Message   Re: ke55 5k conversion munkiSun, 12 October 2003 11:48
Read Message   Re: ke55 5k conversion bennySun, 12 October 2003 12:07
Read Message   Re: ke55 5k conversion munkiSun, 12 October 2003 12:11
Read Message   Re: ke55 5k conversion pro_keSun, 12 October 2003 22:11
Read Message   Re: ke55 5k conversion bennyMon, 13 October 2003 05:21
Read Message   Re: ke55 5k conversion oldcorollasMon, 13 October 2003 05:33
Read Message   Re: ke55 5k conversion bennyMon, 13 October 2003 09:42
Read Message   Re: ke55 5k conversion  oldcorollasMon, 13 October 2003 10:03
Read Message   Re: ke55 5k conversion bennyMon, 13 October 2003 10:39
Read Message   Re: ke55 5k conversion oldcorollasMon, 13 October 2003 10:52
Read Message   Re: ke55 5k conversion bennyMon, 13 October 2003 11:04
Read Message   Re: ke55 5k conversion 79rollaboyTue, 14 October 2003 06:07
Read Message   Re: ke55 5k conversion bennyFri, 17 October 2003 10:30
Read Message   Re: ke55 5k conversion oldcorollasSat, 18 October 2003 10:21
Previous Topic:Alternators
Next Topic:how long to remove an exhaust?

Goto Forum:
-=] Back to Top [=-

Current Time: Wed Jul 23 09:25:58 UTC 2025

Total time taken to generate the page: 0.003993034362793 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.