F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Fuel line question Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
kmwdesign777 Occasional Poster Location: adelaide Registered: August 2003	Re: Fuel line question Tue, 14 October 2003 12:51 May be there is a better alternative but I have used the same tube for both brake and fuel lines.. it comes in various sizes ( It used to be called bundy tubing years ago I think ) ... it comes in straight lengths and is cheap... just go to the local brake shop. It is covered in some kind of green coating now days... I guess you could clean up the ends and braze/silver solder fittings on if you wanted to get fancy. I generally just use rubber line at the ends. In another project I used normal " rubber " fuel tubing and slipped it inside aluminium tubing for protection, .. ie 5/16" rubber line slips inside 19mm aluminium tubing (from memory) with a little detergent etc. also you can get the coiled spring as suggested elsewhere in a size to suit 19mm tube and with a bit if effort you get good bends ( up to 45 deg ?? )in this tube . kevin. [Report message to a moderator]

	Subject	Poster	Date
	Fuel line question	Pube	Tue, 14 October 2003 08:24
	Re: Fuel line question	Scorpion	Tue, 14 October 2003 10:19
	Re: Fuel line question	kmwdesign777	Tue, 14 October 2003 10:25
	Re: Fuel line question	thechuckster	Tue, 14 October 2003 10:54
	Re: Fuel line question	kmwdesign777	Tue, 14 October 2003 12:51
	Re: Fuel line question	Henn	Tue, 14 October 2003 15:10
	Re: Fuel line question	CrAiGzEE	Tue, 14 October 2003 23:23
	Re: Fuel line question	mrshin	Wed, 15 October 2003 00:16
	Re: Fuel line question	Pube	Wed, 15 October 2003 06:11
	Re: Fuel line question	Skip	Wed, 15 October 2003 07:26

Previous Topic:	1JZ Tacho wiring.....
Next Topic:	Sprinter idle problem

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.