Toymods Car Club Inc: Tech & Conversions => TA22 Supsension & Brake upgrade

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » TA22 Supsension & Brake upgrade Show: Today's Posts :: Show Polls Email to friend

Author

Topic

qik22
Occasional Poster

Location:
Brisbane
Registered:
September 2003

Re: TA22 Supsension & Brake upgrade	Fri, 17 October 2003 14:06

you will need to get complete mx62 cressida struts. and get the steering arms that bolt to the bottom of the strut off an ra60/65 celica. use the std ta22 control arms ( you will have to modify the bracket the stops u going past full lock ), bolt the ra60 str arms onto the std ta22 balljoints. put the springs, top spring seat and strut top off the ta22 onto the cressida struts. bolt the struts in, i think the std ta22 brake lines will do the job (i had new cressida ones sitting at home so i used them) bolt the tie rod end onto the steering arms adjust so u dont have rediculous toe in and thats basically it. fairly simple only took me an hour or 2 to do plus a few to figure out how to do it.... [Report message to a moderator]

Current Time: Fri Jan 3 05:31:08 UTC 2025

Total time taken to generate the page: 0.0059030055999756 seconds

.:: Contact :: Home ::.