| Author | Topic |
|---|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: 18rg cam timing
|
Sat, 18 October 2003 09:59
 
|
 |
prolly not much help directly, but if you have a dial gauge or a keen eye, check where the lobes are centred. should be maybe 100-110 deg apart?
can also do this by determining open and close angles and working out the lobe centre from half way between....
shouldn't take too long to turn it over a few times and get a rough measurement. you can get free degree wheels from
(the tavia is particularly good)
http://www.tavia.com/free_degree_wheel.html
http://www.jag-lovers.org/lumps/tech/degree_wheel/ degree_wheel.htm
http://www.machinerycleanery.com/DucatiTwinDisc.ht m
good luck...
of for reference, a stock K motor intake opens 16BTDC and closes at 50ABDC. exhaust is opposite.
for a K-B motor the timing for intake is 18BTDC and 58ABDC
for my current cam,
intake 33BTDC, 64ABDC
exhaust 72BBDC, 32ATDC
intake centre line 106ATDC
lobe seperation angle 108deg
hope this helps a little
Cya, Stewart
|
|
|
| | Subject | Poster | Date |
|---|
 |
18rg cam timing
|
sideshow | Sat, 18 October 2003 09:11 |
|
Re: 18rg cam timing
|
oldcorollas | Sat, 18 October 2003 09:59 |
|
Re: 18rg cam timing
|
Mr DOHC | Sat, 18 October 2003 10:43 |
|
Re: 18rg cam timing
|
sideshow | Sun, 19 October 2003 00:16 |
|
Re: 18rg cam timing
|
THE WITZL | Sun, 19 October 2003 07:09 |
|
Re: 18rg cam timing
|
sideshow | Sun, 19 October 2003 07:48 |
|
Re: 18rg cam timing
|
Mr DOHC | Mon, 20 October 2003 09:42 |
