| Author | Topic |
|---|
Location:
Terrigal
Registered:
May 2002
|
|
Re: Wanted _ TA23 crossmember
|
Mon, 20 October 2003 11:17
 
|
 |
Yeah the RA60/ST etc racks are a lot wider. The KE70 is is much better suited to the RA28 it seems.
I am only taking measurements from the pivot points for the control arms. I want to keep all angles similar from the doner car so have made sure its as close as possible to RA28.
The KE70 control arm holes sit around 610mm apart. The RA28 is around 590mm or so? Thats VERY rough measurements. So we are talking 10mm or so on each side.
Not sure what effect thats going to have yet on the whole thing but time will tell I guess 
|
|
|
| | Subject | Poster | Date |
|---|
 |
Wanted _ TA23 crossmember
|
TurboRA28 | Mon, 20 October 2003 00:07 |
|
Re: Wanted _ TA23 crossmember
|
rob_RA40 | Mon, 20 October 2003 08:24 |
|
Re: Wanted _ TA23 crossmember
|
CLG | Mon, 20 October 2003 09:43 |
|
Re: Wanted _ TA23 crossmember
|
rob_RA40 | Mon, 20 October 2003 10:08 |
|
Re: Wanted _ TA23 crossmember
|
CLG | Mon, 20 October 2003 10:40 |
|
Re: Wanted _ TA23 crossmember
|
CLG | Mon, 20 October 2003 10:48 |
|
Re: Wanted _ TA23 crossmember
|
rob_RA40 | Mon, 20 October 2003 11:01 |
|
Re: Wanted _ TA23 crossmember
|
TurboRA28 | Mon, 20 October 2003 11:06 |
|
Re: Wanted _ TA23 crossmember
|
TurboRA28 | Mon, 20 October 2003 11:07 |
|
Re: Wanted _ TA23 crossmember
|
rob_RA40 | Mon, 20 October 2003 11:12 |
|
Re: Wanted _ TA23 crossmember
|
TurboRA28 | Mon, 20 October 2003 11:17 |
|
Re: Wanted _ TA23 crossmember
|
TurboRA28 | Mon, 20 October 2003 11:22 |
|
Re: Wanted _ TA23 crossmember
|
rob_RA40 | Mon, 20 October 2003 11:27 |
