F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Suspension questions Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Scorpion Forums Junkie Location: Menai area of Sydney Registered: June 2003	Re: Suspension questions Mon, 20 October 2003 14:11 As Norbie indicated, they're an offsetting bolt. Where the bottom of the McPherson strut bolts to the steering knuckle, there are usually two large bolts, the ones that people often have trouble getting undone. The camber pins are basically a replacement bolt with a bulge (cam) in them that enables you to vary the vertical angle (camber) of the steering knuckle. Normally used to replace the top bolt but can be used to replace the bottom bolt. The pins normally come in standard diameters from 10mm up to 17mm. I think one of those should suit your car. [Report message to a moderator]

	Subject	Poster	Date
	Suspension questions	wilbo666	Mon, 20 October 2003 10:40
	Re: Suspension questions	Norbie	Mon, 20 October 2003 12:12
	Re: Suspension questions	7M-Brisbane	Mon, 20 October 2003 12:17
	Re: Suspension questions	Norbie	Mon, 20 October 2003 12:29
	Re: Suspension questions	Scorpion	Mon, 20 October 2003 13:43
	Re: Suspension questions	wilbo666	Mon, 20 October 2003 13:56
	Re: Suspension questions	Scorpion	Mon, 20 October 2003 14:11
	Re: Suspension questions	wilbo666	Tue, 21 October 2003 08:09
	Re: Suspension questions	mrshin	Tue, 21 October 2003 01:30
	Re: Suspension questions	gold28	Tue, 21 October 2003 03:25
	Re: Suspension questions	Norbie	Tue, 21 October 2003 10:00
	Re: Suspension questions	pannelvan_screema	Tue, 21 October 2003 11:49
	Re: Suspension questions	gold28	Wed, 22 October 2003 03:52

Previous Topic:	Roll Centre Adjuster(RCA) Question
Next Topic:	Here's a curly one (7mgte wiring)

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.