F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » AVC-R in 1JZ-GTE / JZA70 Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
jza70-mel Regular I supported Toymods Location: Perth WA Registered: May 2002	Re: AVC-R in 1JZ-GTE / JZA70 Thu, 25 July 2002 03:32 I'm not sure 100% that the AFC will disable fuel/boost cut, but it will raise the threshold for as high as the MAP signal is adjusted down. in other word, if normal boost cut is 14 psi, by manipulating the MAP signal via the AFC, you can get the ECU to think it is seeing 14 psi by reducing the MAP signal (ie. from 16 psai back down to 14psi) I had my Greddy FCD installed before my AFC and I don't know if I actually need it now. I just installed it because it was cheaper than putting in the AFC, and it was all I could afford at the time. I safely ran 1 bar with it but it was undoubtedly running rich. If you get the AFC first, you would get some gains anyway in power. The FCD doesn't effectively give you more power apart from turning up the boost. [Report message to a moderator]

	Subject	Poster	Date
	AVC-R in 1JZ-GTE / JZA70	1jwunder	Wed, 24 July 2002 14:23
	Re: AVC-R in 1JZ-GTE / JZA70	ma61_turbo	Thu, 25 July 2002 01:35
	Re: AVC-R in 1JZ-GTE / JZA70	jza70-mel	Thu, 25 July 2002 03:13
	Re: AVC-R in 1JZ-GTE / JZA70	1jwunder	Thu, 25 July 2002 03:22
	Re: AVC-R in 1JZ-GTE / JZA70	jza70-mel	Thu, 25 July 2002 03:32
	Re: AVC-R in 1JZ-GTE / JZA70	1jwunder	Thu, 25 July 2002 05:32
	Re: AVC-R in 1JZ-GTE / JZA70	jza70-mel	Thu, 25 July 2002 10:14
	Re: AVC-R in 1JZ-GTE / JZA70	Manny	Thu, 25 July 2002 11:29
	Re: AVC-R in 1JZ-GTE / JZA70	1jwunder	Fri, 26 July 2002 06:52
	Re: AVC-R in 1JZ-GTE / JZA70	mx83toy	Fri, 26 July 2002 10:03
	Re: AVC-R in 1JZ-GTE / JZA70	Soarer	Fri, 26 July 2002 10:19
	Re: AVC-R in 1JZ-GTE / JZA70	1jwunder	Mon, 29 July 2002 01:28

Previous Topic:	1jz diag mode help needed.
Next Topic:	1JZ-GTE into a VL

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.