Author | Topic |

Location: Kita-Ku, Sapporo, Japan
Registered: January 2003
|
Re: Shimming oil pump
|
Thu, 23 October 2003 13:57

|
 |
for the K series, the TOSCO 3K manual suggests a shim between 2 and 4mm, and this is meant to up the pressure form about 40Psi to 60Psi.
i know it's a pain in the ass to change the shims, but i would start with getting a good oil pressure gauge... measure stock pressure, then add a 1 or 2mm shim, then measure pressure again..
this is for a 3K/3K pump, but i think it is the same style of pump.
depends how keen you are to pull the pump out again 
Cya, Stewart
|
|
|
| Subject | Poster | Date |
 |
Shimming oil pump
|
Jayem | Thu, 23 October 2003 13:50 |
 |
Re: Shimming oil pump
|
oldcorollas | Thu, 23 October 2003 13:57 |
 |
Re: Shimming oil pump
|
Jayem | Thu, 23 October 2003 18:55 |
 |
Re: Shimming oil pump
|
ra23celica | Thu, 23 October 2003 22:47 |