F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Tuning Carbies?? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Jayem Forums Junkie Location: Finland Registered: November 2002	Re: Tuning Carbies?? Thu, 23 October 2003 17:25 You can adjust that 3000rpm thing by bending rod(mild Z thing) that goes from fast idle rocker to choke flap mechanism and the nose that leans on to rocker. Correct rpm(from memory) when fast idle is on is about 2000rpm's. Fast idle should go off when you slightly open the throttle. Dying part is prolly caused by too lean choke mixture. That can be adjusted by turning heat wire bell clockwise->richer mixture. Check also that choke flap is fully closed at open air temperature of 20C and fully open at normal running temperature. Get repair manual for more info. Renewing and checking that vacuum hoses goes from right place to right place makes wonders also. [Updated on: Thu, 23 October 2003 17:26] [Report message to a moderator]

	Subject	Poster	Date
	Tuning Carbies??	Connor	Wed, 22 October 2003 08:52
	Re: Tuning Carbies??	Connor	Wed, 22 October 2003 22:46
	Re: Tuning Carbies??	Connor	Wed, 22 October 2003 22:48
	Re: Tuning Carbies??	Steve M	Wed, 22 October 2003 23:21
	Re: Tuning Carbies??	Steve M	Wed, 22 October 2003 23:33
	Re: Tuning Carbies??	Scorpion	Wed, 22 October 2003 23:45
	Re: Tuning Carbies??	hotrolla	Thu, 23 October 2003 00:36
	Re: Tuning Carbies??	Jayem	Thu, 23 October 2003 17:25
	Re: Tuning Carbies??	mrshin	Fri, 24 October 2003 02:35
	Re: Tuning Carbies??	lowlux	Wed, 29 October 2003 02:27
	Re: Tuning Carbies??	oldcorollas	Wed, 29 October 2003 04:37

Previous Topic:	Tricks and traps 4AGZE into TA22
Next Topic:	gearbox swap

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.