F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » ID'ing a 1JZ-GTE Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Danish Forums Junkie Registered: March 2003	Re: ID'ing a 1JZ-GTE Sun, 26 October 2003 10:59 It's the same as mine. The outlet from the turbo's comes out at a 90 degree angle, it has TRC and the crank case vent hose goes past the rubber flex joint on the intake as well. So it's, i think a second generation, Toyota Chaser engine. [Report message to a moderator]

	Subject	Poster	Date
	ID'ing a 1JZ-GTE	thefonz	Sat, 25 October 2003 11:06
	Re: ID'ing a 1JZ-GTE	draven	Sat, 25 October 2003 12:03
	Re: ID'ing a 1JZ-GTE	Danish	Sun, 26 October 2003 10:59
	Re: ID'ing a 1JZ-GTE	hobpedlar	Sun, 26 October 2003 13:08
	Re: ID'ing a 1JZ-GTE	hobpedlar	Sun, 26 October 2003 13:23
	Re: ID'ing a 1JZ-GTE	sideshow	Sun, 26 October 2003 23:43
	Re: ID'ing a 1JZ-GTE	Celia-Sue	Tue, 28 October 2003 02:56

Previous Topic:	1JZ conversion problem - Sump fouling front universal joint
Next Topic:	18rgu efi questions

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.