| Author | Topic |
|---|
Location:
Northwestern Sydney
Registered:
August 2002
|
|
Re: 18rgu efi questions
|
Mon, 27 October 2003 20:50
 
|
 |
the cat would depend on the head wouldn't it??
the 18R-GEU is an unleaded engine from factory but I'm not sure about the R-G head?
I've done the R-G --> R-GEU swap but I had a busted R-GEU to start with.
You'll also need to get an igniter, ECU and loom.
the RA65 loom is a good place to start
I believe a 22r-e ECU works (as well as 5m-e)
and an ra65 igniter + coil.
And while your getting the parts get the intake pipe from the AFM as well as the air filter box. the box doesn't fit in an ra28. but I used the brakets to mount the AFM.
If you go to pick and pay less for the parts and take the loom out of a car, mark the wires before you cut them. Saves heaps of time down the track chasing wires.
Mine has the pin out for an O2 sensor but doesn't use it.
|
|
|
| | Subject | Poster | Date |
|---|
 |
18rgu efi questions
|
matt_84 | Mon, 27 October 2003 04:43 |
|
Re: 18rgu efi questions
|
roger | Mon, 27 October 2003 06:06 |
|
Re: 18rgu efi questions
|
Norbie | Mon, 27 October 2003 07:10 |
|
Re: 18rgu efi questions
|
matt_84 | Mon, 27 October 2003 11:25 |
|
Re: 18rgu efi questions
|
Norbie | Mon, 27 October 2003 13:00 |
|
Re: 18rgu efi questions
|
Lambolica | Mon, 27 October 2003 20:50 |
|
Re: 18rgu efi questions
|
Norbie | Mon, 27 October 2003 21:48 |
|
Re: 18rgu efi questions
|
Lambolica | Mon, 27 October 2003 22:07 |
|
Re: 18rgu efi questions
|
roger | Mon, 27 October 2003 22:19 |
|
Re: 18rgu efi questions
|
oldcorollas | Tue, 28 October 2003 02:07 |
|
Re: 18rgu efi questions
|
Norbie | Mon, 27 October 2003 23:19 |
|
Re: 18rgu efi questions
|
matt_84 | Tue, 28 October 2003 01:39 |
|
Re: 18rgu efi questions
|
Lambolica | Tue, 28 October 2003 01:48 |
