F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Fitting a MICROTECH system to a 3T GTE??? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
10sec_rx7 Forums Junkie Location: Syndey Registered: December 2002	Re: Fitting a MICROTECH system to a 3T GTE??? Thu, 30 October 2003 22:04 TA22 GT wrote on Thu, 30 October 2003 21:53 Hi all, I getting close to buying a Microtech fuel/ignition system to run my 3T GTE. I have a couple of questions that I hope someone can help me with- What is the best oxygen sensor to use? I want to keep the dizzy and dual coils, can the dizzy be used for getting crank angle positions? If so, how and what do I have to do? What air temp sensor should I use? Where should it be fitted? (before or after turbo?) Besides the air temp, oxygen sensor and crnak angle I assume its pretty easy to install? Thanks, Simon Depending on the Dizzy that is fitted to the motor depends on the options you can get, if it just has a single magnetic pickup in the sizzy like most toyotas you will still have to run your dizzy and factory coil, if you have a dizzy like a late model 4age you can multi coils and DFI etc. air temp sensor can be ordered with the ecu, they are about $40 with a connector, it is a delco type, you wont need the oxy sensor, it does nothing and will not be accurate either, the install is not too hard but if you havent done one before put a full day aside for it, just make sure you run the power wires direct to the battery and the pink wire to IGN + on. Dale [Report message to a moderator]

	Subject	Poster	Date
	Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Thu, 30 October 2003 10:53
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Thu, 30 October 2003 11:42
	Re: Fitting a MICROTECH system to a 3T GTE???	Danish	Thu, 30 October 2003 16:31
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Thu, 30 October 2003 22:04
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Fri, 31 October 2003 11:52
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Sun, 02 November 2003 23:36
	Re: Fitting a MICROTECH system to a 3T GTE???	oldcorollas	Mon, 03 November 2003 02:04
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Mon, 03 November 2003 02:15
	Re: Fitting a MICROTECH system to a 3T GTE???	oldcorollas	Mon, 03 November 2003 02:32
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Mon, 03 November 2003 02:43
	Re: Fitting a MICROTECH system to a 3T GTE???	EMP-2TG	Fri, 31 October 2003 15:20
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Sat, 01 November 2003 01:33
	Re: Fitting a MICROTECH system to a 3T GTE???	tanman	Fri, 31 October 2003 18:42
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Fri, 31 October 2003 21:16
	Re: Fitting a MICROTECH system to a 3T GTE???	oldcorollas	Sat, 01 November 2003 01:43
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Sat, 01 November 2003 01:45
	Re: Fitting a MICROTECH system to a 3T GTE???	oldcorollas	Sat, 01 November 2003 01:53
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Sat, 01 November 2003 01:56
	Re: Fitting a MICROTECH system to a 3T GTE???	thechuckster	Sat, 01 November 2003 02:18
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Sat, 01 November 2003 02:32
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Sat, 01 November 2003 09:37
	Re: Fitting a MICROTECH system to a 3T GTE???	thechuckster	Sat, 01 November 2003 10:51
	Re: Fitting a MICROTECH system to a 3T GTE???	sideshow	Sat, 01 November 2003 14:26
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Sun, 02 November 2003 11:20
	Re: Fitting a MICROTECH system to a 3T GTE???	sideshow	Sun, 02 November 2003 11:39
	Re: Fitting a MICROTECH system to a 3T GTE???	EMP-2TG	Sun, 02 November 2003 11:29
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Mon, 03 November 2003 10:52
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Mon, 03 November 2003 21:54
	Re: Fitting a MICROTECH system to a 3T GTE???	thetoyman75	Tue, 04 November 2003 11:13
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Tue, 04 November 2003 21:09
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Tue, 04 November 2003 11:38
	Re: Fitting a MICROTECH system to a 3T GTE???	sideshow	Tue, 04 November 2003 11:43
	Re: Fitting a MICROTECH system to a 3T GTE???	thetoyman75	Wed, 05 November 2003 11:31
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Wed, 05 November 2003 21:32
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Wed, 05 November 2003 12:00
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Thu, 06 November 2003 11:44
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Thu, 06 November 2003 20:46
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Fri, 07 November 2003 07:00
	Re: Fitting a MICROTECH system to a 3T GTE???	TE72_Turbo	Fri, 07 November 2003 13:08
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Sat, 08 November 2003 05:10
	Re: Fitting a MICROTECH system to a 3T GTE???	TE72_Turbo	Sat, 08 November 2003 07:00
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Sat, 08 November 2003 12:53

Previous Topic:	My car is wacked
Next Topic:	engine crane to borrow today? (saturday)

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.