| Author | Topic |
|---|
Location:
Canberra
Registered:
December 2002
|
|
Re: 18rg 9.7:1 piston 1MM oversized
|
Fri, 31 October 2003 01:03
 
|
 |
Thanks for the reply guys sorry it took so long to get back to you but my internet has been down.
The bore i have is 89.5 so i really need over sized pistons, it is to replace one in the set that is damaged beyond repair
Clint could you see if they are 1MM oversized for me.
Steve Could you get a price for me on geting one made and how close they could get it to the origional weight of the pistons
Again thanks for your replys guys im nearly at my wits end with this car.
|
|
|
| | Subject | Poster | Date |
|---|
 |
18rg 9.7:1 piston 1MM oversized
|
Jason | Tue, 28 October 2003 11:16 |
|
Re: 18rg 9.7:1 piston 1MM oversized
|
Steve M | Thu, 30 October 2003 05:00 |
|
Re: 18rg 9.7:1 piston 1MM oversized
|
CLG | Thu, 30 October 2003 05:46 |
|
Re: 18rg 9.7:1 piston 1MM oversized
|
Jason | Fri, 31 October 2003 01:03 |
|
Re: 18rg 9.7:1 piston 1MM oversized
|
Jason | Fri, 31 October 2003 21:53 |
|
Re: 18rg 9.7:1 piston 1MM oversized
|
Jason | Sun, 02 November 2003 23:18 |
|
Re: 18rg 9.7:1 piston 1MM oversized
|
CLG | Mon, 03 November 2003 00:21 |
|
Re: 18rg 9.7:1 piston 1MM oversized
|
Jason | Mon, 03 November 2003 01:21 |
|
Re: 18rg 9.7:1 piston 1MM oversized
|
Steve M | Mon, 03 November 2003 06:14 |
|
Re: 18rg 9.7:1 piston 1MM oversized
|
Jason | Mon, 03 November 2003 22:27 |
|
Re: 18rg 9.7:1 piston 1MM oversized
|
Steve M | Wed, 05 November 2003 00:49 |
|
Re: 18rg 9.7:1 piston 1MM oversized
|
Jason | Wed, 05 November 2003 01:51 |
