F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 18RG Conversion - any Problems? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
gold28 Forums Junkie Location: Madrid - Spain Registered: August 2002	Re: 18RG Conversion - any Problems? Fri, 31 October 2003 02:45 You will probably need an electric fuel pump because some of them don't have a cam to operate the mechanical one. Just go to the wreckers and pick one up off an old mazda or something, shouldn't cost more then $20. The accelerator linkeages are better if you run the cable to a new pedal that was originally designed for cable operation. This is a good opportunity to grab all thoes bell cranks and push rods and throw them as far as you can. Trust me, you won't look back. The blocks are pretty much the same, so they will fall into place there. Your biggest problem is getting the exhaust on and the linkeages sorted out. You should be able to knock it over in a weekend. [Report message to a moderator]

	Subject	Poster	Date
	18RG Conversion - any Problems?	Chunks	Wed, 29 October 2003 11:19
	Re: 18RG Conversion - any Problems?	clancey	Wed, 29 October 2003 11:46
	Re: 18RG Conversion - any Problems?	RA28midge	Thu, 30 October 2003 23:36
	Re: 18RG Conversion - any Problems?	gold28	Fri, 31 October 2003 02:45
	Re: 18RG Conversion - any Problems?	Chunks	Fri, 31 October 2003 08:35
	Re: 18RG Conversion - any Problems?	Mr DOHC	Fri, 31 October 2003 12:24
	Re: 18RG Conversion - any Problems?	blackRA28	Fri, 31 October 2003 13:52
	Re: 18RG Conversion - any Problems?	Jason	Fri, 31 October 2003 22:00
	Re: 18RG Conversion - any Problems?	THE WITZL	Sat, 01 November 2003 02:05
	Re: 18RG Conversion - any Problems?	Norbie	Sat, 01 November 2003 03:22
	Re: 18RG Conversion - any Problems?	thechuckster	Sat, 01 November 2003 03:40
	Re: 18RG Conversion - any Problems?	THE WITZL	Sat, 01 November 2003 04:24
	Re: 18RG Conversion - any Problems?	rx793	Sat, 01 November 2003 04:37
	Re: 18RG Conversion - any Problems?	Mr DOHC	Sat, 01 November 2003 05:25
	Re: 18RG Conversion - any Problems?	THE WITZL	Sat, 01 November 2003 11:04
	Re: 18RG Conversion - any Problems?	Norbie	Sun, 02 November 2003 01:30
	Re: 18RG Conversion - any Problems?	Mr DOHC	Sun, 02 November 2003 01:39
	Re: 18RG Conversion - any Problems?	blackRA28	Sun, 02 November 2003 11:27
	Re: 18RG Conversion - any Problems?	Timmy Turbo	Sun, 02 November 2003 13:02
	Re: 18RG Conversion - any Problems?	blackRA28	Mon, 03 November 2003 09:10

Previous Topic:	ma61 brake master cylinder size
Next Topic:	AE-71 GZE stuff

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.