| Author | Topic |
|---|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: 4.3 diff centre for ta22
|
Sat, 01 November 2003 00:16
 
|
 |
|
MS60's are F series (7.5"). Your TA22 Celica will either have a D or T series diff, you can check this buy looking at the data plate in the engine bay. Next to the trans (T50 if it's a manual) stamp, there will be a diff code staring in either D or T. Some Celicas came with an optional 4.3 fitted, however these are very uncommon. Your best bet would be to find a set of gear from a Sprinter as T has stated, however if you buy the whole centre, beware that they are not a direct swap, there are some mounting bolt differences in terms of length of studs. You'll need to ask someone as to the compatibility of using a T series ring set, in a D series housing, it may need shimming due to its smaller (minutely) housing.
|
|
|
